Still have a little bracket issue, but Brake is mm's from working.
(MBBO#05 CLASS 2) - Sassy - Finished - Round 2.5, riding strong!
- Thread starter metalchewy
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Still have a little bracket issue, but Brake is mm's from working.
Bike built for macro Mondays or what buddy?!?... Very cool axel nut!
Hehehe, I think Macro Mondays was created for nuts like me who get lost in the details...
Had a little time before dark, have an early start tomorrow, so an extra hour today.
Decided to start the seat post.
Marked out the cuts and centerlines.
Folded it up after cutting them out.
Added one more cut. And put to the bike.
Puts it about where I want it.
Decided to start the seat post.
Marked out the cuts and centerlines.
Folded it up after cutting them out.
Added one more cut. And put to the bike.
Puts it about where I want it.
Gives that saddle a whole new perspective slung over the back wheel that way! And I get the inside joke on the 10 ball....der hanger bolt...10 speed...very Tom-slick. 
Very Sweet
Looking good!
Luke.
Luke.
Finished fitting the rear brake.
It works. Shows the shiny spacer i used in place of a grommet.
Added these to the springer, to help protect the frame.
It works. Shows the shiny spacer i used in place of a grommet.
Added these to the springer, to help protect the frame.
Disc brake looks like it works great! 
Luke.
Luke.
Welded the seat pistlast night...
A bit of putty, and paint and glaze...
Lunchtime pic..
Can see the roughed out disc bracket on front. Cant do any more till i get the front axle. Should arrive Monday or Tuesday. Ordered in oct... should have ordered it in July..
A bit of putty, and paint and glaze...
Lunchtime pic..
Can see the roughed out disc bracket on front. Cant do any more till i get the front axle. Should arrive Monday or Tuesday. Ordered in oct... should have ordered it in July..
Well, I've been told i can never leave well enuff alone. I took the stainless short cage that was originally on the springer an flattened the curve out of it with a 12lb sledge and my anvil and a few scraps of cardboard.
Used the vice to whack a little curve back into it.
And hand bent.the corners.
Had this old shortened spring lying around. And have a short cage springer. May give me another inch of pedal clearance.
Now just need a a shorter length bolt. Need togo to hardware store... then will bolt it in and see how it looks.
Used the vice to whack a little curve back into it.
And hand bent.the corners.
Had this old shortened spring lying around. And have a short cage springer. May give me another inch of pedal clearance.
Now just need a a shorter length bolt. Need togo to hardware store... then will bolt it in and see how it looks.
Dig the, reshaped crown 
That will make a pedal scraper.
That will make a pedal scraper.
That deep one really throws the front out there. Shortening the spring by 2" and shortening the crown by 4-5". My bet, Should raise it. Also Stiffen it up, and make it more rideable for higher speeds...Dig the, reshaped crown
That will make a pedal scraper.
Picked up a 3" bolt while i was out.
Dropped the spring in some acid to take the rust off. Will be a few hours yet.
I see what you doing;
now ,, that I am on tablet.
Couldn't see as well on phone.
Not only will it raise,,,should have
turning radius increase.
now ,, that I am on tablet.
Couldn't see as well on phone.
Not only will it raise,,,should have
turning radius increase.
Ok, so, major look decision.
I installed the shorter crown. Painted with a mist of blue to mixup the coloring a tad.
With flash the suspension shows a little more...
I like the look before. And i like the liok after...
Now have to decide which way togo.
It shortened the wheelbase by about a foot... stood up at attention, or kicked back long ride...
Long 7 foot.
Versus 6.5 foot.
I like them both... decisions...
I installed the shorter crown. Painted with a mist of blue to mixup the coloring a tad.
With flash the suspension shows a little more...
I like the look before. And i like the liok after...
Now have to decide which way togo.
It shortened the wheelbase by about a foot... stood up at attention, or kicked back long ride...
Long 7 foot.
Versus 6.5 foot.
I like them both... decisions...
Last edited:
Short cage,
pros.
Seat post level, looks cool
Top of head tube same level as seat post
Tons of pedal clearance
Easeier steer
Forks dont hit frame.
Cons
Shorter,
Neck points up.
Guard almost level.
Crown not as cool.
Long cage
Pros
Neck points out.
Guard looks cool.
Makes the bike look like the long ride that it is...
Crown looks sweet!
Wife says it is sexier....
Cons
Pedals closer to ground
Chopper steer. (Lean turn)
Forks hit frame.
pros.
Seat post level, looks cool
Top of head tube same level as seat post
Tons of pedal clearance
Easeier steer
Forks dont hit frame.
Cons
Shorter,
Neck points up.
Guard almost level.
Crown not as cool.
Long cage
Pros
Neck points out.
Guard looks cool.
Makes the bike look like the long ride that it is...
Crown looks sweet!
Wife says it is sexier....
Cons
Pedals closer to ground
Chopper steer. (Lean turn)
Forks hit frame.
Option 3, short spring, longer crown, pedal draggin..
All awsome but I like 2, looks like a serious Rider with style!!!!
Also I plastidip is awsome on compression springs.. also helps hide corrosion wear..
expansion ones not so hot...
Also I plastidip is awsome on compression springs.. also helps hide corrosion wear..
expansion ones not so hot...
MC, that short spring with the upright stance really nails it for me. The long look is more radical, but doesn't look as 'put together', if you know what I mean?
I think your front end modification really bumped this build up a notch or two!
I think your front end modification really bumped this build up a notch or two!
