This could work, just have to get bolts long enough to go through the upper tree and into the plug.You might be able to use rubber freeze plugs in place of the welded nuts if you cut the fork down. Get the I.D. of the tube and check with your local auto parts for the right size.
Yeah that's how it worked with the center tube but...
You might be able to use rubber freeze plugs in place of the welded nuts if you cut the fork down. Get the I.D. of the tube and check with your local auto parts for the right size.
I like star nuts better I think. But I wonder which would be the least likely to slip? The biggest hassle is that the OCC upper tree isn't open all the way so that the forks can go thru. Instead they have a solid top with a circle underneath that the fork slips into, and screw holes for the machine screws to go thru to attach to the welded plugs... clean looking, but a hassle to modify.
It can be done with Paint.net, just put them all in separate layers and then go into layer properties and adjust the transparency.
Yep, that's what I was planning to do, and why I will use a tripod and a centerline to put the bikes on.
Fountains...
Luke.
Your step stool stand makes it look really tall, like you need a ladder to get up on it. 
