"Nameless No More - Now MONOLITH!"

[MattiThundrrr]

Or maybe like this

The clamps do damage, bikes with sloping top tube don't work well (hello, that's my whole life!), they swing around like crazy... To be honest, I worry about the welds on aluminum bikes because they sway so much, they aren't meant to be subjected to forces like that

 

[Captain Awesome]

Or maybe like this View attachment 245709
The clamps do damage, bikes with sloping top tube don't work well (hello, that's my whole life!), they swing around like crazy... To be honest, I worry about the welds on aluminum bikes because they sway so much, they aren't meant to be subjected to forces like that

Ahhh, yeah I don’t do hanging racks. No way

 

[ingola]

What kind of rack is it?

One that is so bad he wouldn't borrow one of my bikes and pedaled a 24 BMX all over the campsite for a week.

 

[Tallbikeman]

I've got a pair in a box. They've got that flat surface at the outside of the grip. Haven't tried them yet, but if stars align correctly, I might finish a mountain bike someday.

I've been changing over to the ergo grip you are describing with the flat on the outboard end. I found that grips with little locking clamps are the best. Without clamps the darn grips are impossible to stop rotating. They are quite a bit better in my case for sleeping hand syndrome.

 

[Tallbikeman]

Welcome to the Iron Man class of MTB. Early pre NORBA races here in northern California always had an Iron Man class since so many Klunkers were one speed bikes usually with coaster hubs. The Iron Man class was for one speed bikes only. Don't worry about that dude on the 1x11 bike passing you, you are getting just as much exercise as he is. If not more.

 

[Kroozerdave]

Seems to me for all those of us that don’t drive a pickup that racks are an issue.
Having just seen how much creativity and engineering brilliance comes from BBO.
Maybe an ongoing Bike transport Solutions Thread or or focused build off?

 

[68z27]

I've been changing over to the ergo grip you are describing with the flat on the outboard end. I found that grips with little locking clamps are the best. Without clamps the darn grips are impossible to stop rotating. They are quite a bit better in my case for sleeping hand syndrome.

We've always used Aqua Net hair spray; I don't know why, we just have. A few squirts or so in the grip and a coat on the handlebar - slide it on fast. That sucker ain't coming off or moving without a fight.....

 

[MattiThundrrr]

We've always used Aqua Net hair spray; I don't know why, we just have.

Hahahahaha so good to know it's not just me! Only thing is, I use Finesse, in the spritz bottle. It smells pretty

 

[68z27]

Well I've got naturally curly 1980s rock-n-roll hair and I need all the help I can get while zooming by!

 

[MattiThundrrr]

Back together again for the umpteenth time... new hi lo chainring, new ss specific rear gear. Tried a ghost ring, but it wouldn't fit with the curved stay interfering, so it's back to the not so good tensioner. I can't run a half link because of the chain ring, so I am pondering a singulator

32-13 gearing feels a little steep, will have to see how it handles climbs and tech. It's getting dialed in, but still a long way to go. Ask Ingola how fussy I can be about the "little things"

 

[ingola]

Back together again for the umpteenth time... new hi lo chainring, new ss specific rear gear. Tried a ghost ring, but it wouldn't fit with the curved stay interfering, so it's back to the not so good tensioner. I can't run a half link because of the chain ring, so I am pondering a singulatorView attachment 249256
32-13 gearing feels a little steep, will have to see how it handles climbs and tech. It's getting dialed in, but still a long way to go. Ask Ingola how fussy I can be about the "little things"

Just get it going then we can worry about the little things at the end of the day your not going to care while your riding

 

[Tallbikeman]

Back together again for the umpteenth time... new hi lo chainring, new ss specific rear gear. Tried a ghost ring, but it wouldn't fit with the curved stay interfering, so it's back to the not so good tensioner. I can't run a half link because of the chain ring, so I am pondering a singulatorView attachment 249256
32-13 gearing feels a little steep, will have to see how it handles climbs and tech. It's getting dialed in, but still a long way to go. Ask Ingola how fussy I can be about the "little things"

In my late 20's racing in Northern California mountains I ran a fairly low single speed gear. Front would be 28 teeth and rear would vary from 18 to 24 teeth. My philosophy was try to pedal most of the uphills because pushing a bike uphill could really slow you down. Low gearing never held me back on downhills since I didn't pedal anyway. Faster just meant less braking action. The only time this hurt me was on races where there was a lot of more or less level trails. I never let other racers choice of gearing color my own judgement about what I could or could not do. Some racers were in superb cycling shape or were just better athletes and I had to accept and live with that. I went to the races anyway and had a great time. Now-a-days I would plug in AI to tell me which gearing was best for me. I just mentioned AI to impress everyone with how tech savvy we are in California. Good luck with finding that magic gear ratio.

 

[Lowe Beau]

Back together again for the umpteenth time... new hi lo chainring, new ss specific rear gear. Tried a ghost ring, but it wouldn't fit with the curved stay interfering, so it's back to the not so good tensioner. I can't run a half link because of the chain ring, so I am pondering a singulatorView attachment 249256
32-13 gearing feels a little steep, will have to see how it handles climbs and tech. It's getting dialed in, but still a long way to go. Ask Ingola how fussy I can be about the "little things"

That looks sooo ….”torquey(?)”

 

[Lowe Beau]

We've always used Aqua Net hair spray; I don't know why, we just have. A few squirts or so in the grip and a coat on the handlebar - slide it on fast. That sucker ain't coming off or moving without a fight.....

View attachment 245837

 

[MattiThundrrr]

All back together again, pretty much done for now. Will think about gearing, still needs a better shock, wants new grips and pedals

Fresh Jagwire!

 

[ingola]

All back together again, pretty much done for now. Will think about gearing, still needs a better shock, wants new grips and pedals View attachment 249820
Fresh Jagwire!
View attachment 249819 View attachment 249818 View attachment 249817

Looks great and your finished one ...go inside and do the in your face dance

 

[MattiThundrrr]

Looks great and your finished one ...go inside and do the in your face dance

She's interested when they're not done.
"Should I be impressed that it had more gears before?"

 

[MattiThundrrr]

Find any future updates here:

The ThundrrrFleet

I'm streamlining the content. This is the spot where I'll do updates that aren't really builds. All the stuff about previous builds will be here as well. Idle chit chat too.

ratrodbikes.com