Nirve cannibal

[kram]

Picked this one up for cheap. It was just the frame, fork, and few other parts. I stuck some wheels on it to get it rolling. It’s a little rough and someone cut the fork legs down. I’m not really into the chopper look, so I probably would have done the same thing. I’ll probably put some 5 1/2” cranks on it and get it rideable to see if I like it.

 

[Endlesschain]

Picked this one up for cheap. It was just the frame, fork, and few other parts. I stuck some wheels on it to get it rolling. It’s a little rough and someone cut the fork legs down. I’m not really into the chopper look, so I probably would have done the same thing. I’ll probably put some 5 1/2” cranks on it and get it rideable to see if I like it. View attachment 217131

Looks good even with those wheels

 

[Wildcat]

To get the pedals off the ground, maybe just raise the front enough to get clearance. I've found the shorter cranks make a bike hard to pedal.

 

[kram]

To get the pedals off the ground, maybe just raise the front enough to get clearance. I've found the shorter cranks make a bike hard to pedal.

Without buying new forks this is as high as the front can go. A previous owner cut the forks quite a bit. It might also just be a pedal scraper.

 

[kram]

I might also cut the bottom bracket out and move it forward and up. These bikes aren’t as big as they look.

 

[One-eyed Sailor]

36" front wheel. Can't wait to see where you go with this.

 

[kram]

36" front wheel. Can't wait to see where you go with this.

I have thought about a 29er front wheel. I have one somewhere.