Redline smack build

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Yes 8 spline
Shouldn't matter. I've got several 8 spline and they all have straight hole centers. Measure it just to be sure maybe. I just got a 39t SE steel sprocket for this latest build
 
I figured that the sprocket was wore out but thought I could make it work but I was wrong.
I've tried looking on line but haven't found one like this one. I can only find one's with a smooth hole in the center instead of one with groves like the one I have.
Does it have to have or can it be a smooth hole.
The sprocket is a 39 tooth
If you have a spline drive crank set up. you most use spline drive sprocket.
spline drive sprocket

1680106107701.png

s-l1600.jpg

https://www.ebay.com/itm/3853392720...=1&amdata=enc:1XIDdNGuDRf-Za-XZ7Ylt0A83&norov
take a picture of your old sprocket off bike and crank arm spindle. I might have one like it. if I do just pay shipping it's yours. but need to see yours as they make different ones.
 
If you have a spline drive crank set up. you most use spline drive sprocket.
spline drive sprocket

View attachment 227379
s-l1600.jpg

https://www.ebay.com/itm/3853392720...=1&amdata=enc:1XIDdNGuDRf-Za-XZ7Ylt0A83&norov
take a picture of your old sprocket off bike and crank arm spindle. I might have one like it. if I do just pay shipping it's yours. but need to see yours as they make different ones.
It's a 19mm 8 spline hole ordered one yesterday hoping it will be here Friday.
 

Latest posts

Back
Top