Love the shaft drive. Several shaft drive bikes hang from the ceiling of the old General Store in St. Augustine, Fl. A couple show up in these pictures.
Shaft Drive Klunker bike
- Thread starter BartRidesEternal
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Wow, that is a cool place! Interesting things hanging there. If I pull a rope, will I win a prize?
I managed to do some soldering / brazing:
Cleaning the tubes!
First I had to braze the seatpost because the off centre BB is in the way.
Flux.
Seatpost brazed!
Droplet in the rear, I gotta watch out for that next times.
Mitered the downtube and cleaned it. Flux on it and lets go!
Headtube. Not perfect, but I'm happy how it turned out!
Let it cool down in the shed.
Top tube(s) next and planning on bending the chainstay.
Seattube is 28mm diameter.
Downtube is 35mm diameter.
I’ve never been there! In the list
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
I wish I had known about this. Drove right past it a few months ago while vacationing in St. Augustine.
- Joined
- Sep 17, 2013
- Messages
- 4,312
- Reaction score
- 9,499
Holy wah!I wish I had known about this. Drove right past it a few months ago while vacationing in St. Augustine.
I worked on cleaning the fillets and coloration on the frame.
After about 20 minutes my dremel tool stopped working so I continued with an hand file and sandpaper.
I wanted to take this frame + the shaft to a swapmeet.
I am aware this is entry level brazing, but everyone started somewhere.
These sanding cones are great, but get destroyed easily. Protective eyewear is a must!
Still some brass to be removed, but I don't mind this 'rough' look right now. What do you think?
After about 20 minutes my dremel tool stopped working so I continued with an hand file and sandpaper.
I wanted to take this frame + the shaft to a swapmeet.
I am aware this is entry level brazing, but everyone started somewhere.
These sanding cones are great, but get destroyed easily. Protective eyewear is a must!
Still some brass to be removed, but I don't mind this 'rough' look right now. What do you think?
