Phiredog Joined Apr 17, 2013 Messages 60 Reaction score 28 Location Kingston, TN Rating - 100% 1 0 0 Jul 14, 2015 #1 Anybody know a good way to remove this sprocket nut without involving a hammer? I would imagine a tool for this existed once upon a time. Thanks in advance. Sent from my iPhone using Tapatalk
Anybody know a good way to remove this sprocket nut without involving a hammer? I would imagine a tool for this existed once upon a time. Thanks in advance. Sent from my iPhone using Tapatalk
U user 135 Joined Dec 4, 2006 Messages 10,825 Reaction score 863 Rating - 100% 3 0 0 Jul 14, 2015 #2 Try a pin spanner wrench similar to an angle grinder wrench. http://www.harborfreight.com/adjustable-pin-wrench-36554.html
Try a pin spanner wrench similar to an angle grinder wrench. http://www.harborfreight.com/adjustable-pin-wrench-36554.html
DJ Bill Joined Oct 30, 2013 Messages 701 Reaction score 323 Location NY State Capital DIstrict Rating - 100% 9 0 0 Jul 14, 2015 #3 You might have to make one with a piece of 1/8++ steel and two drill bits for the pins if you can't borrow one from someone.
You might have to make one with a piece of 1/8++ steel and two drill bits for the pins if you can't borrow one from someone.
KJV Joined Aug 5, 2010 Messages 5,022 Reaction score 7,505 Location Southern Ohio Rating - 100% 7 0 0 Jul 14, 2015 #4 Clamp in bench vise..turn crank.
jerrykr Joined Feb 22, 2010 Messages 2,260 Reaction score 293 Location DFW Area Texas Rating - 0% 0 0 0 Jul 15, 2015 #5 I see no reason to not use a drift punch and a hammer. I'd try the spanner wrench first and celebrate if it worked!
I see no reason to not use a drift punch and a hammer. I'd try the spanner wrench first and celebrate if it worked!
