Transplanting BMX components - standards?

[BDC]

I've pretty much decided not to repair the cracked frame on my STR Quadangle and will transplant components onto a new S&M ATF frame.

But have a few questions before I pull the trigger. And before I ring the shop thought I'd ask the collective:

1. The STR has an American Bottom Bracket and the S&M has a Mid - I have a Profile elite crankset and BB on the STR - the bearings are the same size - just without the cups?

2: I also have a Chris King 'No Threadset' (With cups) on the STR and the S&M headset is integrated - same question - will the bearings work do ya think?

I googled but couldn't find any solid data.

TIA.

 

[ingola]

@Captain Awesome

 

[Captain Awesome]

I have never done it but my understanding is that the bearings for American and mid are the same. The Profile site even lists them as one sku

Now the headset is a good question. Is the integrated flat or a tapered bottom?

 

[68z27]

I have never done it but my understanding is that the bearings for American and mid are the same. The Profile site even lists them as one sku

A couple of months ago, I was looking for sealed American BB (50.8mm) bearings in case I entered the upcoming ORBO. The impression I got was the bearings for American and Mid are the same. The difference is for the American setup, you get a couple of spacers/cups that the standard sized brg presses in to.....

What is the brand name and bearing number you currently have?

 

[ingola]

This is good stuff I've wondered this to

 

[BDC]

A couple of months ago, I was looking for sealed American BB (50.8mm) bearings in case I entered the upcoming ORBO. The impression I got was the bearings for American and Mid are the same. The difference is for the American setup, you get a couple of spacers/cups that the standard sized brg presses in to.....

What is the brand name and bearing number you currently have?

Cheers.
The build is almost 8 years old, so I've probably lost that data, but I'll have a surf around the profile site.

I have never done it but my understanding is that the bearings for American and mid are the same. The Profile site even lists them as one sku

Agreed.

Now the headset is a good question. Is the integrated flat or a tapered bottom?

<Maxwell Smart voice:> Next Tuesday Chief. </Maxwell Smart voice.>

I don't know, either way its not a deal breaker.


This will be my entry into ORBO.

Key Inventory.

Bars and saddle - not the post.

If I get the clear coat raw finish I might get the bars to match.

 

[BDC]

I just ordered a red frame and fork with matching S&M 11's bars.

When's the next Build Off start?

 

[ingola]

Post in thread '** The next build off 2024 **' https://ratrodbikes.com/threads/the-next-build-off-2024.119940/post-1299137