Unofficial March Shootout II

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Got the frame tore down and a coat of rattle can primer on...

Tick tock...
76f8a73a5b25b63c3d31802b5be789d7.jpg


Sent from across the universe using Tapatalk
 
Also, you guys getting close or finishing up don't forget to make a post with the words I'm done, with the picture you want me to use in the voting thread. I'll try to get the voting thread up ASAP and we'll run voting for a week. I've yet to get all the parts I need for the trophy, but it's a thing for sure.

Carl.

Sent from across the universe using Tapatalk
 
Last edited:
Been living in NC for 20 years now. Seems hard to believe people still have snow at the end of March. It's 76 degrees outside right now.

Sent from my Pixel 2 XL using Tapatalk
I would be somewhere near where you are for March and April if it weren’t for the national quarantine. It is paradise up here, except for these two months.
 
Serviced bearings, added new tubes, adjusted a few things. This ‘55 Hawthorne is probably as done as it’s going to get. It rides well steering is quick. I figure it’s a quintessential rat rod bike as it is.
67ecb196971470dafc3e9a9ca51f49bc.jpg

0be657cafc247dc2b5bb72183bd4af7b.jpg

04f3584bc32532047964bda8260c0dd5.jpg

2d35c4315d517cdaf508c90f87af8743.jpg

2df360b89483a195eef6827b9e952e9a.jpg



Sent from my iPad using Tapatalk
 
Serviced bearings, added new tubes, adjusted a few things. This ‘55 Hawthorne is probably as done as it’s going to get. It rides well steering is quick. I figure it’s a quintessential rat rod bike as it is.
67ecb196971470dafc3e9a9ca51f49bc.jpg

0be657cafc247dc2b5bb72183bd4af7b.jpg

04f3584bc32532047964bda8260c0dd5.jpg

2d35c4315d517cdaf508c90f87af8743.jpg

2df360b89483a195eef6827b9e952e9a.jpg



Sent from my iPad using Tapatalk

So retro and so cool. You can always quicken the steering up even more. and make it more dangerous to ride by adding a suicide knob to the steering wheel. Ha ha.
 
So retro and so cool. You can always quicken the steering up even more. and make it more dangerous to ride by adding a suicide knob to the steering wheel. Ha ha.
Yeas just happen to have a knob, think I’ll pass though.
Or just hold on the gooseneck in the center, instead of the rim.

Sent from my Pixel 2 XL using Tapatalk
I did experiment with hand placement. 180 degrees on the wood rim just about right...lol.


Sent using Tapatalk
 
Yeas just happen to have a knob, think I’ll pass though.

I did experiment with hand placement. 180 degrees on the wood rim just about right...lol.


Sent using Tapatalk
I like the old wood knobs. My favorites are the
I would be somewhere near where you are for March and April if it weren’t for the national quarantine. It is paradise up here, except fo
these two months.
 
Frost this morning. Still too frikkin cold to paint. Covid lockdown keeping me from the tools and supplies I need. Guess who can't find a mask to paint with. Don't think the Donkey is going to make it to the finish line.
 
Last edited:
I like the old wood knobs. My favorites are the

6f4d47605fd7c26d01f035f8dc5ceb89.jpg

Here’s my extra $5 knob. Thought about using this chainguard but I’ll save it for something else.


Sent using Tapatalk
 
I’m in! Project name: “The Hawk”.

I had to check my camera roll to see when I started this build. Lucky for me it was the 2nd of March [emoji16]

I bought this second-hand balance bike (cost me only €7,50.) for me son and found it a little too “girly”. And it’s a great opportunity to transform this bike into something unique.

I’m close to done with this build. Actually I’m planning to finish it tomorrow. Fortunately I took quite a few pictures of the build progress.

The starting point.
3f5b91876d2ce9de40090f59070b4ec3.plist


Sanding and preparation for paint.
13e3fe9cd67e3902922ec7424b5907c0.plist

fe72f130a809167c06fa3b0ff93c8dd0.plist


I bought new handlebars, stem and grips. The handlebars were way to wide for a 2,5 year old so I had to cut it. I marked the cut with tape and then I cut at the wrong side of the tape [emoji85]. Oops. I had to weld it back together because there was not enough length left for the grips.
0e487b969c184a3a55fcd9b2f419cf35.plist

d68beba3bfef49c43fc2a9888a5a5f8e.plist

343d53ed674532d70c759c19c808ef08.plist

e93581a589f557ebc5c56a2db61cd413.plist


Spraying the blue topcoat.
0425beab4dcdf050054548ef3e2c6b2e.plist


Laying down graphics.
4da3d2229d3c811b236307cb1fca0108.plist

62c475707ca29b877003c0d902d7d3c8.plist

32658c41dea24610600f4517c91cd668.plist

cd69d9c9a2e2f990dafa84672374dab9.plist


As I said before, tomorrow is the day to finish this project.




Sent from my iPhone using Tapatalk Pro
 
Don't forget rule 2...
A post with the words I'm done, with the picture you want me to use for the voting thread.

Carl.

Sent from across the universe using Tapatalk
 
Just finished the satin black. It's been raining and so damp and humid. But I'm hoping to assemble tomorrow. Tick tock.
6b868400a9b6a46b996564e340c7b97e.jpg


Sent from across the universe using Tapatalk
 

Latest posts

Back
Top