W I D E & Loaded - OUT, unfortunately ☹️

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Starting to take shape a little more. Figuring out how it’s all going to fit together.

B3BB0D46-32BA-489F-85C2-BCB571BAB9B4.jpeg
C8D660FC-1A4D-43D7-816B-FB33A91930A1.jpeg
 
Current situation:

56CBF18E-B3FB-4B5E-B53E-81460AC764AE.jpeg


So I was working on the whole “front wheel/axle/bearing” situation and everything was going well until, well, it wasn’t. I was making good progress whittling the axles down so the bearings would fit, but then I decided to get my hokey-... Harbor Freight lathe involved to speed up the process and promptly ruined most of the threads on the axle shaft. I think it can be made to work for the purposes of this build, but if I ever want to use the original components again I’m gonna have to buy a $100 axle. Luckily Worksman is pretty good about replacement part availability so it should be available down the road if I need it.
 
I’m sure there’s an owners manual somewhere that warns this is a bad idea:

1D8F523D-17BE-4F04-A8F2-8FFC6A9787CE.jpeg


...but hey, the axles are “masheened” and the new bearings are on:

A35F9E17-D1AA-49E8-A38F-5A7EF3788070.jpeg


B2C8DE15-B26C-4ABD-B506-5C57AAAB54F0.jpeg


If I had taken a little more time and not boogered up one set of threads I would be done right now, because the other side works fine.

7B916D13-57AA-4F5A-AEB1-63DEFAF246CC.jpeg
 
MAIL CALL:

Once I get into these things I start getting new ideas and hit eBay/Amazon. Stuff is starting to show up on my doorstep now.

Finally got my last set of Chinesium bearings from overseas because I didn’t want to pay $3 extra to get them from the states. Hopefully I can get this front wheel thing nailed down this weekend.

F57C935E-9C3A-4D2B-972C-C17994C727FD.jpeg


Also got what I hope to be my rear fender today. Obviously it doesn’t just bolt on, but I need to get my rear wheel configuration set so I can see what needs to be done to the fender.

60821F52-167E-4861-89C3-F982AEA6325C.jpeg


Speaking of rear wheels, I think I have settled on a pair of the heaviest cast aluminum wheels in the world. Now I need to try some tires to get a height and width, and at least finish my mounts enough so they will stay in place while I mock things up.

054A51C1-5194-42C2-9E96-F92EE8477AAB.jpeg


I should have some front fenders and hubcaps by Monday at the latest. And a trailer hitch...🤔
 
Well, in between “dumb things I gotta do” projects this weekend I managed to gnaw some holes in some metal, at least enough to throw some wheels on to mock up the stance for the rear. I’d actually like them to be a little closer together, but I like the way these wheels fit and I’m kind of at the limit of what I can do with their width and offset. I’m getting some free tires on Monday to try, so maybe that’ll change things. I was originally going for something that looks like a big “mono-tire” in the back, but this may work. The idea is to split the fender in half front to back and widen it a bit so it at least covers the gap between the tires. My projects are constantly in a state of flux, I move things around and if I see a look I like I change directions.

2615F62A-D21A-4499-ABB3-6AC2821F724B.jpeg
65BCA6D1-0915-4B48-B298-DC1DF16BF7F3.jpeg
DDE149FA-3409-4A4B-B364-6386AF8E5BEB.jpeg
 
So, two steps forward, one step back (guess that’s better than 1 step forward, 2 steps back...) - turns out all VFR front wheels are not created equal, even from the same generation bike. Not insurmountable, but I can’t make both of them work the same way using the same bearings. I was trying not to mod the wheels at all, but in all honesty these two wheels are kinda janky anyways so I may just hit ‘em with a grinding wheel to make my life easier.


5C1F2608-B3CA-46C8-8666-76BFB0B3794A.jpeg
 
Got some more big stuff to mess around with while I’m waitin’ for little stuff!


First up, I got me some Hoosier-daddy well-loved racin’ slicks! Not sure if they’re the size I want to go with, but they were free so why not slap ‘em on? I don’t get to keep the wheels, and I’ll probably have to mount some new tires in return, but that’s what I got a tire machine for. It doesn’t cost me $50 every time I want to try something now.

A668A591-6808-46E8-8B40-53C0A9CBB49C.jpeg


Next I got me some good ol’ boy Peterbilt hubcaps to hide all the atrocities I’ve been doing to these wheels. Fabbing up some clips should keep me busy for a day or so.
0E7DF986-B359-4A21-9169-0713FE2DCEBB.jpeg
4FE05690-834E-45A5-88A4-20A8B74BBD83.jpeg



Next, some classic gen-u-wine Arlen Ness fenders...in plastic! They’re cheap because they’re ABS, not metal, which should make them easier to work with.

5E22BAF1-0A25-4F3E-BCEB-7E606F7D1FF3.jpeg


When I saw the little box they came in I was a little worried they might look too small, but they seem just about right for front fenders.

F85C6E76-7E14-452E-BFE4-6AC3F7939A3E.jpeg


Probably won’t do much with any of the fenders until I get everything back together more and sitting back on the ground, but so far things are lining up how I envisioned.
 
Diggin' the look of the Hoosier Daddies ! This is a really wacky and fun build!

RaT oN~!
 
More parts pile stuff:


Firstly, I WILL get this front axle done this weekend! I’m done messing around trying to save wheels no one will ever be interested in! Here’s the issue: because of how this is all fitting together I am using the inside holes of the wheels to support the wheel, instead of the bearing races like they were originally (on a motorcycle). Because it’s a bike this should work fine, but the holes aren’t the same size side-to-side, or now even wheel to wheel. The fix:

1423739C-1F5C-4E61-9321-2CF14B7A47A6.jpeg

35mm diameter bearings, and a 35mm hole saw. Just gonna make everything the same size. Also, why spend extra money on an axle spacer when you can just order a 10-pack of bearings for $10?


Next up, I’m actually sort of surprised this amazon item showed up:

98B20016-F457-4C25-824B-747DF72D1906.jpeg



I needed a 2” hitch mount for something, something you see everywhere and don’t think much of until you go to buy one and they’re $40. Somehow I found this one on Amazon for $5, so I took a chance and bought two of them. They actually showed up and are decent quality! Perfect for what I have in mind...
 
More parts pile stuff:


Firstly, I WILL get this front axle done this weekend! I’m done messing around trying to save wheels no one will ever be interested in! Here’s the issue: because of how this is all fitting together I am using the inside holes of the wheels to support the wheel, instead of the bearing races like they were originally (on a motorcycle). Because it’s a bike this should work fine, but the holes aren’t the same size side-to-side, or now even wheel to wheel. The fix:

View attachment 233907
35mm diameter bearings, and a 35mm hole saw. Just gonna make everything the same size. Also, why spend extra money on an axle spacer when you can just order a 10-pack of bearings for $10?


Next up, I’m actually sort of surprised this amazon item showed up:

View attachment 233908


I needed a 2” hitch mount for something, something you see everywhere and don’t think much of until you go to buy one and they’re $40. Somehow I found this one on Amazon for $5, so I took a chance and bought two of them. They actually showed up and are decent quality! Perfect for what I have in mind...
Have a link for that hitch plate?
 
Spent some time in the shop tonight and got further than I thought I would:


875A7693-1DA9-4496-918C-69093EC661A7.jpeg
40AA1ABE-3466-43D3-BB70-55AE09FE2E16.jpeg
B1A3B7AE-78C6-45D2-BCA5-4BDE468D3D2A.jpeg



It’s still got a case of the Weeble-wobbles I need to fix, and it looks more like a car than I thought it would, but I’m kind of diggin’ it? First thing I need to do now is shore up that rear end so it doesn’t fold in half when I sit on it!
 
This beastie is insanely cool!!!
LOVE IT!!!
 

Latest posts

Back
Top