well I decided to squeeze one more build in this year.

[Slow-Rider]

its a 2016 Koxx bike co Resurrection Patrick Guimez Signature frame model Resurrection 21.2" tt

this frame is trick but no removable brake post. like the new 2023 model .

but look how sweet it is!

primo bars are waiting on paint but starting to look like a BMX bike.

 

[Slow-Rider]

some glam shots

 

[Slow-Rider]

 

[Slow-Rider]

handlebars ready for paint or powder coating

 

[Slow-Rider]

after looking at 40 color samples in there shop. I gave up on a pink match. sure I can spend hours looking on line at Prismatic powders thousands of blends of pink powder. get it shipped to me. but the smallest quantity they ship. would do 3 hole bikes. then wait a week to get it. send it to be put on / sprayed on handlebars. put it next to frame and hope it's close enough. if not strip bars get another color shipped out. no thanks you. when with basic gloss black. but I have a idea how to dress it up.

 

[Slow-Rider]

shinny

 

[Slow-Rider]

not sure should I cut seat post down more? thinking it' to high? then again cut to much off can't put it back on.

 

[Slow-Rider]

just needs my brakes and done.

 

[MattiThundrrr]

not sure should I cut seat post down more? thinking it' to high? then again cut to much off can't put it back on.

I'm old school MTB, I ride em high. I like the saddle just below the knees so I can grip it tight when standing, and still sit down to pedal when I'm lazy. For me, that's just below the grips. The kids at the track think my setup (and the size of the saddle itself!) is insane though

 

[Slow-Rider]

trying my hand at painting this Quamen Stylez V2 sprocket. think the shape go's well with coffin gussets on the Resurrection frame. but the only one I have is 30T will see if it fits / clears frame. other wise I need to buy a 28 tooth version.

 

[Slow-Rider]

I'm old school MTB, I ride em high. I like the saddle just below the knees so I can grip it tight when standing, and still sit down to pedal when I'm lazy. For me, that's just below the grips. The kids at the track think my setup (and the size of the saddle itself!) is insane though View attachment 247026

ya the theory is to high it can smack your junk. when jumping / pulling ticks.

 

[Slow-Rider]

sprocket clears frame barely. did not dry as nice as this photo .

but with some touch up should look all wright for a rider.

30/9 gear combo
now its down to putting on a brake cable and call it done!

 

[Son of Kradus]

ya the theory is to high it can smack your junk. when jumping / pulling ticks.

my knees prevent me from peddling with the real low seat! I too ride the old skool BMX's high!
The sproket looked great, did you throw clear over it!

 

[Slow-Rider]

fixed took it to Epic BMX. Ethan whipped up some MacIver stuff and made it work. dam loudest freaking bike horn ever. :lol: sounds like a diesel rig horn when I brake. got to love clear pads.

 

[Slow-Rider]

my knees prevent me from peddling with the real low seat! I too ride the old skool BMX's high!
The sproket looked great, did you throw clear over it!

after A few days playing around with the bike. 30/9 gear is just not for me. so bought another NOS sprocket 28 tooth version. could not duplicate my one off paint job. but it turned out OK after the oven bake. to toughen up the rattle can paint backed enamel work.

have not installed it yet. but have a look.
front side
step one attempt looks to carnival not evil enough. for this build.

add more pain colors and some lace plus clear coat. better

now for the cooler looking back side

next swap ditch the clear brake shoes. way to car horny . :lol:

 

[Pondo]

Looking good! I like the paint you did on the sprocket, kinda trippy. I always rode with my seat too high when I was a kid but we didn't have any skate parks to play in back then. Just the streets, creeks, construction sites, etc. I like the way the low seats look but my knees won't do it any more.

 

[Slow-Rider]

Looking good! I like the paint you did on the sprocket, kinda trippy. I always rode with my seat too high when I was a kid but we didn't have any skate parks to play in back then. Just the streets, creeks, construction sites, etc. I like the way the low seats look but my knees won't do it any more.

ya I can't run slammed seats any more. unless its say a overly tall frame. but on a 20" bmx nope.

 

[Slow-Rider]

well finally removed the 30 tooth & 2 links off the fly chain. then slammed the Demolition wheel . it looked good but my knees protested the 30 tooth up front 9 tooth rear on a 20" bike.
loved how narrow and less protrusive the fly brake shoe are. do to the bevels molded in to the brake shoe & screw. so you have less parts. making brake bolts sit in closer. but could not stand the dam horn you get from clear pads! so threw on a set of left over Odyssey pads. stops on a dime gives you five cents back. if it weren't for my cassette hubs sound. now I could ride this in a library and nobody would hear me coming.

so it's done! :/ or is it? I could add pegs. I have a box full of grind pegs. :/ add 2 pegs / 4 pegs or no pegs??

I know build # 2 the HB condor is getting NOS Mosh chrome pegs. just not sure the Reresection needs any pegs.