Finally some progress today!
Started by welding the diff brace to the axle tubes:
Then moved on to the headtube, extended it with some tubing from the frame of a MADD bmx:
Then on to the forks, extended the headtube with some 21mm thick wall pipe and then got ready to weld them to the mini bike legs:
Filled the gaps under the fork crown with bits of steel washers cut to size:
Used the rest of the washers on the top:
So now I have the front and rear ends done, I can work on joining them somehow... I have a few ideas...
Started by welding the diff brace to the axle tubes:
![IMG_20181208_194733168.jpg IMG_20181208_194733168.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/87/87405-IMG-20181208-194733168.jpg)
Then moved on to the headtube, extended it with some tubing from the frame of a MADD bmx:
![IMG_20181208_203418070.jpg IMG_20181208_203418070.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/87/87407-IMG-20181208-203418070.jpg)
Then on to the forks, extended the headtube with some 21mm thick wall pipe and then got ready to weld them to the mini bike legs:
![IMG_20181208_203407591.jpg IMG_20181208_203407591.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/87/87406-IMG-20181208-203407591.jpg)
Filled the gaps under the fork crown with bits of steel washers cut to size:
![IMG_20181208_204610672.jpg IMG_20181208_204610672.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/87/87408-IMG-20181208-204610672.jpg)
Used the rest of the washers on the top:
![IMG_20181208_205222827.jpg IMG_20181208_205222827.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/87/87409-IMG-20181208-205222827.jpg)
So now I have the front and rear ends done, I can work on joining them somehow... I have a few ideas...
![IMG_20181208_210406901.jpg IMG_20181208_210406901.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/87/87410-IMG-20181208-210406901.jpg)