fenders mounted with triple tree fork

[JennieDraegon]

fenders mounted with triple tree forks. Does anyone have any ideas? There is no place to connect the fender to the fork near the steerer tube.

 

[Captain Awesome]

Does the fender also have struts? Are the fenders metal or something else?

Maybe something like this could be adapted?

 

[SkyknightJohn]

I had these from Topeak. Try a search for “fenders for suspension fork” and you’ll get a variety of attachment options.

 

[toro1978]

Is it a rigid triple tree or a suspension fork? And if it is a suspension fork does it have a through axle or a standard older axle?
I have used this type that attaches to the axle. However the fork legs might be in the way if the fender is too short.

 

[Ulu]

fenders mounted with triple tree forks. Does anyone have any ideas? There is no place to connect the fender to the fork near the steerer tube.

Can you stick a star nut in the steerer tube from underneath, and then just run a screw up into it?

 

[Cmdr Ronald]

IF you have space below the steerer tube & crown, fabricate a bridge mount from painted 1/2" or 3/4" flat metal strap. Flat or the newer style rod braces would also attach to the tubes. Executed correctly, the straps would visually disappear.

 

[Ulu]

Wait, is this a suspension fork? Forget everything I said.

 

[JennieDraegon]

Chopper 26 wide forks

 

[JennieDraegon]

Bike build is getting there, just struggling with where to put it once done. Live in a 2nd floor apt, not a house.