Digger…. Yo Mama Ha

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I took a few hours off work this afternoon and started cutting and welding. I decided to go with a slightly less rake for better handling. 40degrees at the head. All splices were made with internal sleeve and plug welds. A few gussets will be installed.

Looking at using a Monark dual springer for front or a dual crown cruiser fork. Not sure just yet. On the fly at this point. Will finish welding after weekend. Going trout fishing in the mountains this weekend.
87D3E083-9B4D-417B-AD38-55FC127594E3.jpeg
20908F92-CAFC-446C-8BCB-3490F539BA1C.jpeg
B459D59F-EA26-4BA2-9E92-4DB93E8A8B9D.jpeg
1039DB3E-9E0C-49BF-9415-8D254B4B72D7.jpeg
727CAEC3-CF66-415D-9F0F-452B48CABC7B.jpeg
075BE244-F415-446D-BB39-C72429C5DBCE.jpeg
065A8FE0-5AC5-4F9E-994D-36573BAE989A.jpeg
193B65CF-0B60-4EC1-8860-B27FFBA21516.jpeg
F2505ABC-A6D3-4F96-BC4F-9ABA01494EDC.jpeg
1DE6FDC5-55E2-42F9-873D-1DD54D27BE2D.jpeg
A833CDEC-E066-4B32-9835-C95CD5AD8433.jpeg
0E7AC247-D207-43B3-85B7-EC49BE4A86CF.jpeg
 
Last edited:
It’s a looker fer sure!
I kinda like the 20” rear. If you have space they will fit a 16” moped tire for some real fat-itude.
But the tallers look good too. I like that it keeps the horizontal bars parallel to the ground either way.
 
Today I worked on some quick visual stuff for proportion. Happy with it. Added some gusset patterns. Reworked the two 3/8 bars that were there. Shortened and stubbed a support to help with rear frame strength. Will be putting a fuel cell under the shell if I end up going with the 80cc. Still researching.
FB55E721-6743-457D-B438-788395519E67.jpeg
2A3E11C4-20FC-4A0B-BD85-B9129B7821E4.jpeg
C9A07360-2001-403C-B295-611444BCEDC8.jpeg
2BD6F019-0C12-4559-A2A9-3A103B0E7459.jpeg
5B787B9A-5529-4339-BE22-29937A71103A.jpeg
3833CD97-6678-48B5-A52B-5658A07B4D13.jpeg
9E227E97-6CE3-4C71-9D5C-B69692884C27.jpeg
FE61CB39-EAA9-43BD-AE10-D36154AA3CAB.jpeg
 
Wow, this is shaping up quickly!
 
salut,je sui attentivement ton travail sur ton vélo, j’adore les diggers,super boulot déjà fait. je pense que ton réservoir irais mieux dans l'autre sens , pour moi il est a l'envers !!! a bientôt pat
Thanks! The tanks are mounted backwards in some cases, in particular the bikes I’m using for reference.
00EA08A3-3719-425F-9E8C-AD24A74D0508.jpeg
17F0C52A-715E-41F4-A9C7-471527C7302A.jpeg
BEC56B37-2B39-4966-8726-3C78FA647489.jpeg
 
Got her back down on the ground today. Messing with bars for use. I will be making my I own I believe. working on tail section tomorrow and preparing for glasswork. I also think I’m going to throw the double spring Monark on it to see it. The one thing nice about these forks is I can drill out the top trees for risers and not be forced to use the traditional centered, steering post stem Decisions Will be made tomorrow.
4A99F792-69CF-465E-92AB-253CFB985269.jpeg
FDE878E2-E852-418B-A7AA-D6C7C78D0615.jpeg
 
questo sembra fantastico
 

Latest posts

Back
Top