The ThundrrrFleet

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
What do you think of those Country Rocks? I installed a set on an old Cannondale SM500 nice tire IMHO!
They seem nice, really sticky on asphalt. I haven't put any serious miles yet. My concern is the tread pattern looks like it will pick up lots of little stones when I hit gravel
 
ORBO dreams got my juices flowing, so I brought the RockRat inside.
IMG_20240101_132629039.jpg

Not the best one in the world, but definitely one of my favorites. This spring, you roll again, old friend.
 
Last edited:
Rear derailleur cleanup
IMG_20240105_153157859.jpg

How many decades of neglect am I scraping off here?
IMG_20240105_153458130.jpg
IMG_20240105_153349506.jpg

This is what I scraped off of one side of one pulley!
IMG_20240105_153708571.jpg

This isn't a before and after thing, this was when I realized that they're actually two different types! I was also surprised to learn they're not black, they're grey
IMG_20240105_153911774.jpg
Anyhow, all cleaned up and back together, just need to tidy up a couple of screws and lube some things, but the 3-in-1 is out in the garage
IMG_20240105_162324423.jpg
 
Last edited:
Ring a ding dong ding
IMG_20240127_134425098.jpg

Two derailleurs and tires
IMG_20240127_134438263.jpg

Shimano STX Bought the rear one new in 1996ish, the front one new-old last year. Makes me happy finally having them together.
IMG_20240127_134533080.jpg

Not fully inflated yet, but plenty of Clarence, clearance
 
This is a Schwinn??? that was given to me that I went through it’s a great little bike I dig it. It is sporting Kenda K-Rads they work well.
 

Attachments

  • IMG_8086.jpeg
    IMG_8086.jpeg
    2 MB · Views: 0
  • IMG_7935.jpeg
    IMG_7935.jpeg
    2.9 MB · Views: 0
  • IMG_8085.jpeg
    IMG_8085.jpeg
    1.9 MB · Views: 0
You mean I may not be biking alone
Maybe. Got the seatpost and seat tube cleaned up, opened up the clamp, now the thing slides in and out smoothly. Pulled the Deerheads off the Nishiki and slapped the cockpit together too
IMG_20240219_163750311.jpg
IMG_20240219_163347472.jpg
It's almost a bike again. Not sure if I like the stem, those bars are way up there now. Riser stem plus riser bar might be a step too far. Still needs all the little things; grips, cables, those little tubes that go in the noodle...
 
Trying to buy a little bit more time for Lil Thundrrr on the Electra. He grew a bunch over the weekend, his knees were banging on the bars.
OG bars:
IMG_20240225_143609295.jpg

Higher rise, less pullback on these ones from a Mongoose BMX should fix that for a while
IMG_20240225_150845339.jpg

I'm going to clean up a longer seatpost I found to give him a little more leg room too. Felt like springtime messing around in the sun
 
I'm going to clean up a longer seatpost I found to give him a little more leg room too.
Hehehe lil bit more than just a post. Would have preferred a chrome one, but aluminum is what I had that fit
IMG_20240301_150302536.jpg

Hopefully I didn't go overboard and he'll still ride it. Gotta get it some new pedals yet
 
The last couple of years, it has felt like I am cursed. Really bad bike luck had been doggin' me. Can't buy a bike no matter how hard I try, can't finish a bike either. I've only been able to count on Duck Norris to keep me rolling. Spending most of last summer without a functional mountain bike will not be repeated. I know it is silly, but I blame my Brodie, things started when I bought it and never did anything with it. With that in mind, dropped it off at the lbs to get some long overdue maintenance.
IMG_20240309_113852946.jpg

Fingers crossed that this is step one towards shaking the Curse, and hopefully a great riding season. I really wanna get to know this bike
 
Did you watch the video like I told you to
No, I've got brakes all figured out, will be studying for the derailleurs though
I might need to borrow that crimp tool but stoked you got them on
Wasn't a specific crimp tool after all, I was using a wire stripper with little section for crimping. Didn't work all that well, might have to make a purchase
 

Latest posts

Back
Top