RRBBO13 J.C. Special / Sharkruiser

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Great work on the fender and skirts. The manifold exhaust looks perfect on there.

kingfish254

thanx KF that is what was trying to achieve


I'm really liking the overall stance, looks brawny!
Nice job trimming the fenders to get the fit right.

TRM Convertible Tanks!
The Renaissance Man

Thanx TRM although i am a bit surprised you didn't mention anything about the gooseneck i was finally able to find
 
Not much to report from the weekend
had mechanical problems with my person vehicle so focused working on that

I did however narrow down my choices on a sprocket / chainring
Duchess got me thinking
about maybe having the sprocket be the turbo/supercharger of the indy motor
since the offys and novi engines had forced induction

I also happen to have the smaller part (44t) of a murray x2 turbo gear sprocket
28453421057_8b355d858e_b.jpg


the chainring on the right is a smaller version (44t) of the chainring that was originally connected to the Murray turbo sprocket
So i will be using one of these two

below is the bike where the larger (52t) chainring was used
c3ee1d50-9604-4a82-8100-8d8019378a1b_zpsc7rfzddr.jpg
 
Last edited:
I like that chainring. You really had me confused with the pic since the tanks are similar. I was getting mixed up that it was the JCSpecial. :D
 
SIX DAYS TO GO!!!!!

countdown.gif
 
Hit some snags this last few weeks but I am back on track
first issue was I couldnt find an affordable spider to fit the uni directional chainring
almost went with the boring solid murray chainring
But found a disc that will work for now
43764010201_42ae1e3f69_b.jpg


Also had to straighten the frame so that has held me off from painting
but I did at least get some spray can pearl on the fender and guards

43764009161_c88451a2c6_b.jpg


I didn't have enough so i need to put another coat on
but it has been unusually humid so the process is a lot slower
at least I didn't have to prep the metal too much
since I am going for a long lost indy car look
besides its a ratrod
it doesn't need to be too pretty
 
I haven't forgot about sharkruiser either
but I have hit just as many snags on that project also

I did trim the "Nostril" area
43715693332_c294d78443_b.jpg


The one big problem i discovered was the stem I wanted to use was for a 1 1/8 fork
so i needed a new solution
ended up separating it in the middle
but I needed a new stem for the fork

I had two bmx styles in my stash
one was narrow enough but to tall
the other was too wide but low enough

Ended up with the middle one that i also found at the local bike swap meet
43764009931_69e7e13037_b.jpg
 
Did you use the rustoleum Pearl Mist? That is what I used as the cream part of my seat and pedals. Cool paint.
 
got some of the metalcrafters base silver and metallic red spray cans
to do the frame
42882719545_0c62cab54b_b.jpg


Also did some trim painting on other parts but had some issues so no pics yet

BTW yes KF the pearl i used was Pearl Mist rustoleum
I just couldnt remember the name when i wrote the last post
 
I didnt get nearly as many photos at the end of this build as I would have liked
The pearl mist spray paint ended up causing me to fall quite behind
to make the paint job work I had to use a lot less of the pearl and more of the metalcast cround coat silver
3

Which turned out to work well since I was also using the red anodizing color

105536-zoom.jpg


The only two other progress shots I got was changing the seat springs
I wanted the rear spring to match the front spring and I had a hairpin base that fit one of my older seats
original spring base on the right
42077237620_2e0a76521a_b.jpg


also wanted to show the #13 on the murray crank arm I used
42981622465_b90d3c44c6_b.jpg


I was also planing to use some model car decals on the bike but they didnt arrive in time

See completed bike bike here
http://www.ratrodbikes.com/forum/index.php?threads/j-c-special.107136/
 
CONGRATS man. I'll check out the finished pics after I finish catching up on the build threads
 
I love this bike! You really nailed the 60's Indy theme!

index.php


Awesome job. I was really worried about this one in the voting, could've gone either way. You got one of my votes!

Why were you worried ? Did you already kno you were gonna win ?? :bandit:
 
Why were you worried ? Did you already kno you were gonna win ?? :bandit:
Haha, just hoping like everyone else! Our two bikes stayed pretty neck and neck the whole way! If I could know the future, I'b be buying lotto tickets instead of refreshing the voting page over and over!
 
Back
Top