RRBBO13 RATLINER ( tail lights, more sprockets, titanium and she is done)

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
It will sit similar in height to rat life but this one will sit at 20 inches compared to 18. I will be using that awesome Brooks b67 that my friend gave me last year. Distance from seat to bb is 27 inches.

Sent from my SM-J727P using Tapatalk
 
More laying out tubes. Found this ladies schwinn for 5 bucks and instantly knew where those sexy curves would go. Also added the three straight tubes to the seat area that tie the rear and front halves together. I kinda like that part not sure yet. Art deco did involve some straight lines like that so we will see.
d4cf0ed3cecaeb8325e47cd202bdc000.jpg
d0b7fab50d483e2302813bb158bff268.jpg


Sent from my SM-J727P using Tapatalk
 
Mad scientist at work.
 
Not really anything new just fab stuff. Front half is welded up other than I will be making some gusset. All butt welds done and ground down. Head tube and bottom bracket welded on. Started on the chain stays and realized previously that it's actually two parts. So the Allen bolts got cut off and the tubes welded and ground smooth making one tube.
1bda6609a62625aec7486259a8f27cd1.jpg
d6e8793e55765ca743499a5299fdcea8.jpg
b47b51a35633ec4981a6741abfaf595a.jpg
1c2e61d2d79cc06ec16f94dcd8d9debe.jpg
c5c05e9dbe49ec5139a4cff58d176830.jpg
9049f3936b653effd473cf5ebe33d47b.jpg
8f5ec112375d3ba658206ed79a9e38cc.jpg


Sent from my SM-J727P using Tapatalk
 
Awesome to see you back in the shop brother. This is goona be slick.
 
A bit of this,a bit of that,a touch of what ever, a sprinkle of the other,blend and wella!!! A taste of rat...

On another subject,can we add a laughing emoji in the like button. Some comments give me a good laugh. Admin anyone...
 
Thank you sir I really wanted a challenge this time around. Something I don't normally do. It's fun for sure even if sometimes I have no clue where the bike is headed.

Sent from my SM-J727P using Tapatalk
 
Let us see how this frame is coming together!!!!
 
Well progress goes boink. This is a great example of sometimes stuff just does not work out. So the drift trike rear end idea flopped when I realized how much I would have to cope the tubes to make it work. This narrowed the rear to where a 2.125 tire would not fit. Yes it will have fenders but I did not want to go more narrow. So I did what I should of done the first time and threw a piece of tubing in the bender and bent a hoop. Then cut and weld and done. Sometimes with these ground up frames it's more difficult to use recycled tubing fit in. My goal by end of today is to have this lower stay done and attached. Then its onto the upper structure.
8c8dee2db1e55a6adc6fd2696a4938e5.jpg
c53d4f732a4841d64319bd9b3c9e5459.jpg
44e07b75e2bfefd204e2a18e282e9ebe.jpg
822fc801b59fc64ea0c56baa0b61b110.jpg
633647902c16bc4fa1b909108fc13ebf.jpg
c9799ebe1f6ca839fe6c808012a97766.jpg
28a9580e5ac7a9c5f1ed0e4262c22a18.jpg
920d08a47fbce331e6cbae676e4239d5.jpg
0c12e36d96f7065e5253df88e471ab0d.jpg


Sent from my SM-J727P using Tapatalk
 
That is gonna look cool wrapping the rear wheel low to the ground.
 
So after I made the long hoop I started looking at the design and realized I didn't need this part that I added on. So pffft off it goes
1915fea0df747f69c62cafabf7e94245.jpg


Sent from my SM-J727P using Tapatalk
 
chain stays for days
 
Back
Top