Here's some pictures with the side panels tacked in. As you can see in the pictures I use the bead roller to put a step around the edge which makes the panels sit flush with the side of the bike. It also makes it a lot easier to weld. I'm anxious to get the front end on it and see what it will actually look like.
![IMGP3269.jpg](https://proxy.imagearchive.com/ed8/ed8d5372983a4ea04faadd92937d4d1d.jpg)
![IMGP3270.jpg](https://proxy.imagearchive.com/a8b/a8b747c450592594e9ff5175ffe6088e.jpg)
![IMGP3271.jpg](https://proxy.imagearchive.com/a18/a18a6ec0f4a08243104a7d3be48634f7.jpg)
![IMGP3272.jpg](https://proxy.imagearchive.com/75a/75a9e07d154743610d72b75231c302dd.jpg)
![IMGP3273.jpg](https://proxy.imagearchive.com/4ab/4ab825b12c638ae4c290fb781a36b169.jpg)
![IMGP3276.jpg](https://proxy.imagearchive.com/eaa/eaaa1472b24ac302b0b9a1ca56457e63.jpg)