Anyone care to do a fat bike winter build off?

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 3, 2010
Messages
12,545
Reaction score
2,895
Location
Body: Kokomo, In... Mind: in the gutter. Soul: in
Rating - 100%
2   0   0
Ok anyone up to a challenge? I want to do a winter build off fat bike style!

5 simple rules:
1. Must be completed by April 1st 2021 - should be plenty of time.
2. Tires... must be 2.5 inches wide or wider for rear tire, front I'll leave to your discretion. As long as it has fat tire in the back you're good - anything goes.
3. Frame- anything goes as long as it's rideable.
4. Must be rideable.
5. May use non bike parts...(motorcycle parts, dragster tires, dirt bike stuff, anything goes so get creative)

Fat rear tire, rideable, use anything you want.
 
big tire 1.JPG


big tire 2.JPG


Hmm. :39:
 
I have been aching to build something like the west coast kids are doing right now. A Clyded out, Warren Wonged, Brain forked, thirteen foot sled I need a car trailer to take to the park honestly since I caught a couple of these rats in Vegas
fec33c5214aa27b377766181cec2f041.jpg
38405051_2028219357243274_7151565326063239168_n.jpg
31711053_1897872203611324_3208167792167616512_o.jpg

doing one with 26 x 4.5 inch tires is kind of a big investment though.
 
I don't know... 99% of the bikes on this forum would fit and probably already have a 2,5" tire in the rear.
Starting at 3" would make more sense, but it is actually still a little thin. I was able to install a 3" tire in my fully's swing arm and will probably swap the air fork for the original old one so I can have the front wheel in 3" as well.
Yes, I know that over 3" wide would require modifications and would limit the participants (I don't have a bike for tires that fat), but statistically 24 x 3.0 is probably the most used size for a rear wheel on RRB.
 
Get to building! Put FBBO in front of your title so we know who's in the build off.

Here's a sneak peek of mine.
IMG_20200918_212101971.jpg
 
I don't know... 99% of the bikes on this forum would fit and probably already have a 2,5" tire in the rear.
Starting at 3" would make more sense, but it is actually still a little thin. I was able to install a 3" tire in my fully's swing arm and will probably swap the air fork for the original old one so I can have the front wheel in 3" as well.
Yes, I know that over 3" wide would require modifications and would limit the participants (I don't have a bike for tires that fat), but statistically 24 x 3.0 is probably the most used size for a rear wheel on RRB.
I decided on 2.5 to give a chance to those who don't have fatter frames, fabrication skills, can't afford fatter tires, or those who want to go muscle bike style (hence why it only applies to the rear tire) but as the saying goes
"mo fatta mo betta".
 
FBBO Hardtime XL
Iam not a fabricator just a dumb truck driver.
Any way just picked up the Hardtime XL frame and this is the first time for a building a bike.
Will post pics soon
 

Latest posts

Back
Top