Willi Witch

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I like the plans so far. That electra top tube has a great curve. I hope you score that fork!!!
 
Just a quick question, how are these frames made? At some spots its filled with brass (i think) but some parts are just not welded at allView attachment 192709View attachment 192710View attachment 192711
CWC boasted in their advertising during this era about the frames being 'electronically welded'. They claimed that it was 100% stronger. It basically fuses the metal together with high voltage.

As you can see, the kid on the left was very excited about the welding process!:rofl:

1947_12_06-saturday-evening-post-jpg-jpg.1287034

1949_roadmaster_ad.jpg
 
CWC boasted in their advertising during this era about the frames being 'electronically welded'. They claimed that it was 100% stronger. It basically fuses the metal together with high voltage.

As you can see, the kid on the left was very excited about the welding process!:rofl:

1947_12_06-saturday-evening-post-jpg-jpg.1287034

1949_roadmaster_ad.jpg
He should be excited, at least i am!
 
Did some testfitting with different tires
First whitewalls (47-559)
20220512_192332.jpg
20220512_192341.jpg

Enough clearance but i dont like the combination with the rims

Next up
Black Schwalbe Big ben (55-559)
20220512_192802.jpg
20220512_192806.jpg

Also more then enough clearance but not what i am looking for...

Back to the creme Fat Franks (60-559)
Mounted them in the bottom of the dropouts, they still are deep enough in the dropouts since they are pretty long.
20220512_193235.jpg

It aint much, but enough. This is the clearance i am looking for.
20220512_180303.jpg

And it also is the best look in my opinion.
 
Since sparks are a thing this buildoff, here ya go
20220512_202243.jpg

It is true, what @KeithFab21 said...
It actually feels pretty good😎
The only difference is the work the grinder has to do, old steel tubing is a lot thicker
20220512_202902.jpg
20220512_205525.jpg
20220512_205534.jpg

Et voila..
20220512_204558.jpg
20220512_210104.jpg

Still needs to be welded but i have to go to a friends workshop to do that.
Thinking about adding another tube to make it more or less original looking.
But since i didnt have a fitting one i called it a day.
Thanks for watching!
 
I see another clue to the "electronically welded frame".

20220512_202902-jpg.193157


If you look closely there are two tubes. Looks like maybe they 'electronically' welded a sleave/plug first and then slide the top tube over it that butts into the seat tube. That would explain the look that it's magically stuck without any evidence of a weld or brazing. :39:
 
I see another clue to the "electronically welded frame".

20220512_202902-jpg.193157


If you look closely there are two tubes. Looks like maybe they 'electronically' welded a sleave/plug first and then slide the top tube over it that butts into the seat tube. That would explain the look that it's magically stuck without any evidence of a weld or brazing. :39:
I liked the witchcraft better😆
 
Since sparks are a thing this buildoff, here ya goView attachment 193156
It is true, what @KeithFab21 said...
It actually feels pretty good😎
The only difference is the work the grinder has to do, old steel tubing is a lot thicker
View attachment 193157View attachment 193159View attachment 193160
Et voila..
View attachment 193161View attachment 193158
Still needs to be welded but i have to go to a friends workshop to do that.
Thinking about adding another tube to make it more or less original looking.
But since i didnt have a fitting one i called it a day.
Thanks for watching!
Looking good, and yep feels good cutting up quality vintage steel… doesn’t hurt a bit
 
Back
Top