Help Support Rat Rod Bikes Bicycle Forum:
Indyjps
- Messages
- 1,126
- Reaction score
- 1,873
Latest activity Postings About
-
-
If you wanna try a 26x1.75, I have a brand new pair of bell Inova out in the garage that you can use, tread pattern similar to this: -
Indyjps replied to the thread Dye Banana ?.I'd it has an upper and lower pan, it's pretty easy to recover. Add some better foam while you're at it.
-
and take your time....dont try to bend it all in one hit, I like the sand idea!!!
-
Indyjps reacted to bleedingfingers's post in the thread What Clear coat to use with new paint job? with
Like.
If its Engine paint I wouldn't clear it I don't even think I'd prime it . Pretty rugged stuff already . But if you are going to use... -
Indyjps replied to the thread What Clear coat to use with new paint job?.I wouldn't clear coat a shiny rattle can paint unless you were trying effects. Need to be sure the base and clear are the same type of...
-
Indyjps replied to the thread Electroplating parts?.I made my own solutions and did zinc, copper, nickel. Never got a true bright nickel finish. Having a Large variable power supply...
-
Indyjps replied to the thread Replacing S7 rims.Yes, do it. https://www.modernbike.com/iso-sizes-for-bicycle-tires-and-rims Chart shows S7 versus 26" This one's a little different...
-
-
Indyjps replied to the thread BMX Gyro upper cable.I pull the gyros off everything,run a straight cable. If you have to reuse an old cable, soak the whole thing in light oil, it'll...
-
Indyjps replied to the thread Wheels for heavy rider. Need advice..Bump up to 12g spokes. Would have to drill hub and rim, but 12g aren't going anywhere.
-
-
Indyjps replied to the thread Wheels for heavy rider. Need advice..Here's 2 700cc 36 hole rims, the Velo is double wall, not sure about the bontrager.
-
-
Indyjps replied to the thread Help Bending a Sissy-Bar.Agree, pack it with sand, bend it around a pole. Put a piece of leather or heavy vinyl between the pole and the tube. I'm...
-
I created this as a reply on the CABE, but figure it's worth sharing here, too. Drill a small (1/6-3/32") hole at the tip of some...
-
Another shout out to @Indyjps who gave me the carb cleaner tip. I hit everything With carb cleaner and wow… that dry crusted grease...
-
Loading…
-
Loading…
