- Joined
- Apr 1, 2022
- Messages
- 34
- Reaction score
- 15
Kickstand for Dyno
- Thread starter ILoveMyElectra209
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Yup. It's a Dyno thing. I made the same inquiry a few years ago relative to my Dyno Glide 24. A fellow forum member helped me out. I would like to give him credit but can't find the thread. So here's the solution. It's available from Walmart and the supplier is Concord Bikes. Have fun!
- Joined
- Apr 1, 2022
- Messages
- 34
- Reaction score
- 15
Thank you
Attachments
My Dyno Mooneyes has that same mount.
- Joined
- Apr 1, 2022
- Messages
- 34
- Reaction score
- 15
What brand and model is this?
From my taxi, back in 2017:
- Joined
- Apr 1, 2022
- Messages
- 34
- Reaction score
- 15
I’m using the same one
And just for reference, 26 x 3" tires will fit the Dyno frame.
It was on Amazon, $11.95
I like the aluminum kick stands, you just cut to length.
I like the aluminum kick stands, you just cut to length.
- Joined
- Apr 1, 2022
- Messages
- 34
- Reaction score
- 15
I’ll have to give it a look
- Joined
- Apr 1, 2022
- Messages
- 34
- Reaction score
- 15
As I was on the Amazon app I ended up purchasing this with my prime,what size cog should I order to get a good gear ratio?
Attachments
It looks like your original chain wheel is 44 teeth, so one less on that new 43 tooth chain wheel will make it just slightly easier to pedal. The rear cog is probably 18, so you will go from 64 GI to 63 GI, hardly noticeable. You may not have to take a link from the chain if you can slide the rear wheel back in the dropouts to tension the chain properly. From there you can decide if it's too easy or too hard for your riding. Then change the cog on the rear hub, adding a tooth will make it easier to pedal, a smaller cog will make it harder to pedal but faster if you have the leg power.
