Romet Tyler with Questions

Advertise with us
Bike Wall
BOXKARS
Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Kevin B

Kevin B

Bicycle Demolitionist
Pro Member
Joined
Mar 31, 2011
Messages
1,608
Reaction score
3,646
Location
Lehigh Acres, (Fort Myers) Florida
Rating - 0%
0   0   0
Found this Romet "Tyler" in the trash today. Aired it up and it rides great. Has new Kenda 26" gum walls on it. They still have all the casting tips.
1000002154.jpg


I'm wondering about the 3 speed. It is in 2nd which is great if it is frozen. It is a Shimano hub. The shifter and cable is gone.

Is there something missing the cable attaches to?

1000002160.jpg


How do I hand shift it to see if it is worth trying to find a cable?

I have been looking for a diamond frame. I want to make a faux bamboo frame like Wildcat made. I don't guess this bike is of any value.

1000002156.jpg

1000002158.jpg
 
KJV said:
Cable emd will habe a threaded bsrrel ; that screw onto that..
Click to expand...
That's what I figured. If I can't find one I could find a long coupling nut that thread and fix a cable to it. I'll need a shifter too.
 
Kevin B said:
Found this Romet "Tyler" in the trash today. Aired it up and it rides great. Has new Kenda 26" gum walls on it. They still have all the casting tips.
View attachment 278824

I'm wondering about the 3 speed. It is in 2nd which is great if it is frozen. It is a Shimano hub. The shifter and cable is gone.

Is there something missing the cable attaches to?

View attachment 278827

How do I hand shift it to see if it is worth trying to find a cable?

I have been looking for a diamond frame. I want to make a faux bamboo frame like Wildcat made. I don't guess this bike is of any value.

View attachment 278828
View attachment 278829
Click to expand...
That's a good candidate for a bamboo paint job, all straight tubes. New seat too, it must have been a fixup project that someone lost interest in.

Can you pull up on that shift bolt? It looks like it's in 3rd gear but hard to tell from the pic. If it won't move then it'll need to come off. There's a rod there in the axle that also will come out and everything will need looked at closely to decide where to go from there.
 
Wildcat said:
That's a good candidate for a bamboo paint job, all straight tubes. New seat too, it must have been a fixup project that someone lost interest in.

Can you pull up on that shift bolt? It looks like it's in 3rd gear but hard to tell from the pic. If it won't move then it'll need to come off. There's a rod there in the axle that also will come out and everything will need looked at closely to decide where to go from there.
Click to expand...
Whoever was working on it left out a serrated part of the seat clamp on each side and that made the seat impossible to set. I changed to a complete clamp and all was well.
 
The shift rod moved easily. The bell crank is binding. I really don't want all those cables for brakes or shifting. Tried a cruiser 26", coaster brake cruiser wheel set. Fit as long as I used 26x2 instead of 26x2.125. Also used a taller stem and wider bars. Much better. Now I will put it away until winter. High humidity until rainy season passes in October.

1000002179.jpg


There is a slight clunk on left crank. I think it is in the BB. Hope these Romet BBs are standard.
 
Kevin B said:
The shift rod moved easily. The bell crank is binding. I really don't want all those cables for brakes or shifting. Tried a cruiser 26", coaster brake cruiser wheel set. Fit as long as I used 26x2 instead of 26x2.125. Also used a taller stem and wider bars. Much better. Now I will put it away until winter. High humidity until rainy season passes in October.

View attachment 278937

There is a slight clunk on left crank. I think it is in the BB. Hope these Romet BBs are standard.
Click to expand...

Loose cotter pin?
 
Nice bike, classic high-end Romet design, and yet the welding, the simple brackets and some of the paint job are a bit (classically) iffy.

I have never seen a Tyler badged frame here, but I have seen them advertised, you would have had to buy it with foreign money at a special shop to get one here, or import it.

My usual problem is the BB, because they do not make them any more, but you have the 3-piece crank and BB instead of the usual 2-piece one, so replacing it with a modern one is viable without losing that classic Romet front sprocket.
 
GeePig said:
Nice bike, classic high-end Romet design, and yet the welding, the simple brackets and some of the paint job are a bit (classically) iffy.

I have never seen a Tyler badged frame here, but I have seen them advertised, you would have had to buy it with foreign money at a special shop to get one here, or import it.

My usual problem is the BB, because they do not make them any more, but you have the 3-piece crank and BB instead of the usual 2-piece one, so replacing it with a modern one is viable without losing that classic Romet front sprocket.
Click to expand...
Thanks. I checked the threads of the bottom bracket and a three piece BB from an Electra fits.
 

Latest posts

Back
Top