Search results

My Basman project Sent from my iPhone using Tapatalk

Welcome from the Lansing area. Tim

Welcome to the "ADDICTION" from the Lansing area.

Some of the Felt cruisers came with that setup stock. Quickbrick in front (26") and thickbrick in the rear (24").

What stem is that?

Just take a look at Jason Pataska's (Petrohead) RRBO6 bike, and compare it to Felt's Deep 6. Jason's bikes images show up all over the internet, but most never bare his name as the builder.

I always use a deepwell socket as a gauge. Find one that fits, then measure it with some cailapers. Tim

The thinner the tensioner the better. You might have to adjust your shift cable so it works properly. Sent from my iPhone using Tapatalk

You may run into an issue with the schrader stem + the 2 tire beads all trying to fit in that small space. Drilling it wont be an issue, but fitting all in there might be. Tim

Welcome from the capitol area.

Tint your primer orange? Tim

Think about making one fork out of the 2. Possibley using the steer tube (for stem issue) and spring (for sag issue).Or go to the hardware or bolt store and find a stiffer spring to eliminate that sag. I have had to do this on my springers due to my portly stature. Tim

What's on the 26" quad? And shoot from there. Sent from my iPhone using Tapatalk

I like that rear fender, wish mine was that short. Time to get out the snips. Tim

Slide a putty knife in between a little bit, then pour some laquare thinner in between. Sent from my iPhone using Tapatalk

You might consider grinding the softer aluminum cups. If you booger one up, they are replaceable, the frame is not.

Porkchop BMX has several different styles of AME grips in brown. Tim

They will hold if you file flat spots on the axle for them to bite into. Tim

There are so many different variables in that question. Wheel and tire selection being the major one, 26" or 24" wheels? My Basman Sport has about 1 1/2" clearance with a 26 rear and a 29 front. Tim

For Sale