Search results

Gatherin the pics up to post now. lol Nito

Is anybody riding regularly in this monthly event? I saw an old post bump that mentioned the Phreaks doing it. Is it members of the Freak Bike Nation? Nito

I've been up to my elbows in this PedalWhips thing! More Steel City to come this weekend for sure! Nito

I know it'll be down to the wire for me but I'll make it. Nito

Thx Luke! I'm looking to perfect this mod on future builds. Still debating on adding a disk brake to it. Nito

The axle on the new side is now not long enough to bolt up to a bracket as it normaly would. But I think I figured that out also. Nito

Here comes the pics guys!! I started with a 2" fender washer and re-cut the center hole to fit a kick back driver then tacked them together. Then I used my caliper to measure the chain line offsets. And used that to determine how much extension I needed. And started cuttin! I cut the...

The sparks been flyin and the metals been meltin on the steel city jack shaft build!! PICS TONIGHT!!!!! Nito

It had me scratchin my head at first also! :confused: lol But then it started falling into place. The shifter linkage will be opposite the new flange/cog assembly so no issue with that. This is the idea....lengthen the existing axle through the new hub flange extension past the new cog that will...

Thx for the idea Carl. Are you saying to re-tap the cones to accept a bigger axle? I would be worried about taking the hub apart to do that because of the complexity of the Shimano 333 3speed hub. Nito

I lined up the flange I made to the hub and marked the holes with a ultra fine point sharpie to get me close. Then used my caliper to fine tune the measurements. Then I prayed my butt off!!! lol Nito

This was a concern of mine to because I've not used a 6/32 in this manner before. I will be using 9 grade 8 6/32's. There clamping strength is listed as 832 lbs and a proof strength (breaking point) of 180lbs. Not to be confused with the very common grade 2 which proof only to 55 lbs and have a...

After alot of planning and scale drawings, I starrted on the jack shaft today. I used my drill press and hole saws to cut a hub flange out of some 1/8" mild steel After that was cut, I transfered the spoke hole pattern over to the new flange. Then drilled and tapped the holes to accept 9...

Some cool lines on this one! Nito

Chucks are like rat rods...they look cool new but killer when they get a little ratty! Nito

Lookin awesome! Nito

Cool lookin ride Nito

The Pedal Whips world headquarters! lol Nito

I'm so used to it being in the background, I didn't even notice! Lol Someone should try it! Nito

Got the shims fabbed up and everything tacked up. Also started on the jack shaft. Tomorrow full steam ahead on the jack shaft !!! Nito