The sparks been flyin and the metals been meltin on the steel city jack shaft build!! PICS TONIGHT!!!!!
Nito
Nito
WINTER BUILD OFF "STEEL CITY"
- Thread starter nito900rr
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
YES!
Luke.
Luke.
Here comes the pics guys!!
I started with a 2" fender washer and re-cut the center hole to fit a kick back driver then tacked them together.
Then I used my caliper to measure the chain line offsets.
And used that to determine how much extension I needed. And started cuttin!
I cut the back of the driver off so it wouldn't bottom out against the jam nuts on the hub.
Added the driver bearings and cone to help support the assembly.
And here it is......
Nito
I started with a 2" fender washer and re-cut the center hole to fit a kick back driver then tacked them together.
Then I used my caliper to measure the chain line offsets.
And used that to determine how much extension I needed. And started cuttin!
I cut the back of the driver off so it wouldn't bottom out against the jam nuts on the hub.
Added the driver bearings and cone to help support the assembly.
And here it is......
Nito
Last edited:
The axle on the new side is now not long enough to bolt up to a bracket as it normaly would. But I think I figured that out also.
Nito
Nito
That looks cool!
Great work!
Luke.
Great work!
Luke.
Thx Luke! I'm looking to perfect this mod on future builds. Still debating on adding a disk brake to it.
Nito
Nito
Last edited:
Tommy Atoms
Guest
Nice engineering on this one.
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
Haven't checked in for a while, there's some cool stuff going on. Looking forward to more.
I've been up to my elbows in this PedalWhips thing! More Steel City to come this weekend for sure!
Nito
Nito
Bring on the weekend!
Luke.
Luke.
Gatherin the pics up to post now. lol
Nito
Nito
So with the jack shaft fab complete and moving on to relocating the BB, a funny thing happened. I was moving some parts around the PEDAL WHIPS laboratory and set this fork next to the STEEL CITY build and could not stop thinkin bout it!!!
Next thing I know this happened.....
and this....
then this.....
And then I came too. To the sound of my beautiful wife saying "the entire neighborhood does not love to hear War Pig by Black Sabbath at full blast". And I saw this in the corner...
What I did:
The remaining fab list is long. But i could not not do this after i saw it! My fab and weld up deadline is next Friday. Leaving 2 weeks for body work, paint and assembly. Most of this is uncharted territory for me but ya gotta start somewhere!!! lol
Back to the lab. Cheers!!!!
Next thing I know this happened.....
and this....
then this.....
And then I came too. To the sound of my beautiful wife saying "the entire neighborhood does not love to hear War Pig by Black Sabbath at full blast". And I saw this in the corner...
What I did:
- cut off the head tube and mocked it up to a 45* rake
- shortened the head tube a 1/2'' to fit the new fork (i'm not using the fork in the above pic but similar.The fork tubes were to big compared to the frame tubing)
- extended the down tube
- notched for the re-purposed head tube
- then mocked up for tack
The remaining fab list is long. But i could not not do this after i saw it! My fab and weld up deadline is next Friday. Leaving 2 weeks for body work, paint and assembly. Most of this is uncharted territory for me but ya gotta start somewhere!!! lol
Back to the lab. Cheers!!!!
Nice build !!!! cool hub work
Jats
Jats
Thx jats
Nito
Nito
Awesome!
Luke.
Luke.
Tacked up the new rake on the head tube and started on the forks.
Nito
Nito
<this cat likes War Pigs and yer bike...
Carl.
Carl.
Super Cool! Great fab skills going on here!
