TRADITIONAL 🅵🅾🅾🅻🅸🅶🅰🅽 - 1930s Elgin Oriole

[kingfish254]

Pulled away some of the masking on the guard to visualize and think through the possibility of the Hot Wheels on it.
If I use it, I am pretty sure that I would paint the infill of the lettering red.
Also, in case you were wondering, I already checked to make sure the cranks had plenty of clearance.

 

[RustySprockets]

I had no idea that was an actual badge. I thought it was just a sticker.

 

[kingfish254]

I had no idea that was an actual badge. I thought it was just a sticker.

Are you talking about the Savannah Transit Aurhority badge? Yes, it's authentic. Pretty sure it would have been a hat badge since it is curved

 

[kingfish254]

I contemplated over the HotWheels guard with flames and other ideas, but I think something simple like a narrow ivory dart going behind it would work well. And I still think it would tie in better if I filled the recessed background of the letters with red.
Opinions?

 

[OddJob]

I like the subtlety of the white on the HotWheels letters,and leave the guard like it is.

 

[kingfish254]

I like the subtlety of the white on the HotWheels letters,and leave the guard like it is.

The hot wheel letters and outline are chrome

 

[Fv2]

Man, I'm digging that Bluetooth fork.

 

[OddJob]

I like how the reflection on the letters makes them look white in this photo.

 

[ingola]

Good morning everyone. I looked at the fork in daylight and I kinda liked what I was seeing. It was also still slightly tacky. Maybe because of the mustard that is been aging underneath. Anyway, I figured I would first try unmustardizing using the 50/50 vinegar and steel wool. This looks promising. I am going to continue with this first just to the unmustard pattern level. Then if I am pleased with that, I'll proceed as normal with the blending and such.

View attachment 273255View attachment 273256View attachment 273257View attachment 273258

Little late to the party I've done similar but stripped to bare metal then applied Vaseline painted then rinsed of them covered the bike with black stove polish wiped it on the whole bike (won't stick completely to the paint but will darken giving paint an old dirty look) and flat clear.

 

[kingfish254]

Had to give the guard a red tape mockup too. Of course if I went this way, the red would be satin colonial Red

 

[RustySprockets]

Are you talking about the Savannah Transit Aurhority badge? Yes, it's authentic. Pretty sure it would have been a hat badge since it is curved

I was actually talking about the Hot Wheels thing, but the transit device is cool, too.

 

[BobbyStillz]

I contemplated over the HotWheels guard with flames and other ideas, but I think something simple like a narrow ivory dart going behind it would work well. And I still think it would tie in better if I filled the recessed background of the letters with red.
Opinions?

View attachment 273694View attachment 273695View attachment 273696View attachment 273697View attachment 273698View attachment 273699View attachment 273700

A small red pin outlining the white racing stripe just might be the right amount of 'punch' to the graphic without distracting from the other details.

 

[kingfish254]

I was actually talking about the Hot Wheels thing, but the transit device is cool, too.

Ah, I see. Yes, I bought a left and right set of these HotWheels pieces for an idea I had back on my Western Sizzler build that didn't pan out.

 

[SwissGuy]

To be honest, I just don't feel the dart underneath the hotwheels badge (no matter if black or red).
I think if you fill in the badge with red (instead of the black), it should be enough by itself on the blank guard.