![IMG_20240727_130741336_HDR.jpg IMG_20240727_130741336_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275280-IMG-20240727-130741336-HDR.jpg)
Started with 2 huffy's chopped the rear sections of both bikes off and used one to stretch the other one a few inches.
![IMG_20240502_182437673.jpg IMG_20240502_182437673.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275267-IMG-20240502-182437673.jpg)
![IMG_20240505_130637737_HDR.jpg IMG_20240505_130637737_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275268-IMG-20240505-130637737-HDR.jpg)
I decided to use both of the built on racks to make the seat one for the base and half the other for a back rest
![IMG_20240509_202700399_HDR.jpg IMG_20240509_202700399_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275269-IMG-20240509-202700399-HDR.jpg)
I had a 1" Harley handle bar I cut 3" out of the center to bring the knurling together and narrow it 3" using a inner sleeve for strength and then welded that together. After that I cut 2" off each end for a total of 7".
![IMG_20240617_192537475.jpg IMG_20240617_192537475.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275271-IMG-20240617-192537475.jpg)
![IMG_20240619_175342243.jpg IMG_20240619_175342243.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275270-IMG-20240619-175342243.jpg)
With some inspiration from some pics from @OddJob decided to go with a satin finish with gloss black flames rims and stem.
![IMG_20240727_130333685_HDR.jpg IMG_20240727_130333685_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275281-IMG-20240727-130333685-HDR.jpg)
![IMG_20240727_130250079_HDR.jpg IMG_20240727_130250079_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275272-IMG-20240727-130250079-HDR.jpg)
![IMG_20240727_130802718_HDR.jpg IMG_20240727_130802718_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275274-IMG-20240727-130802718-HDR.jpg)
![IMG_20240727_130828091_HDR.jpg IMG_20240727_130828091_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275275-IMG-20240727-130828091-HDR.jpg)
![IMG_20240727_130834382_HDR~2.jpg IMG_20240727_130834382_HDR~2.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275278-IMG-20240727-130834382-HDR-2.jpg)
![IMG_20240727_131130153_HDR.jpg IMG_20240727_131130153_HDR.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275276-IMG-20240727-131130153-HDR.jpg)
![IMG_20240727_131213473.jpg IMG_20240727_131213473.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/275/275277-IMG-20240727-131213473.jpg)
Build thread link https://ratrodbikes.com/threads/2-2-1.119751/
Last edited: