29" BMX CRUISERS

[SurfKlunk]

I think this project is now done. Race Inc RA29. Redid the graphics, swapped the bars for Cook Bros Ti cruiser bars and the seat for a real San Marco Regal. 23.7 lbs of radness.View attachment 218385

Rad!

Here are my 29ers

View attachment 217961View attachment 217962View attachment 217963View attachment 217964View attachment 217965View attachment 217966View attachment 217967

My Buddy just sold his Polished CG Big Ripper for pennies, he rode it like twice. Love that bike!

I haven't been around these parts in awhile, funny how full time jobs do that anyway here's one...View attachment 250141
View attachment 250142
View attachment 250144
View attachment 250145
I put different bars, pedals, sprocket, wheels, grips, and saddle on it from stock and it is currently torn down and being stripped of paint, which is a lame time consuming job BTW, and awaiting a new look. I'll post a photoof the in progress soonish.

I laced 20mm Profile Elite Hubs to Sun Rhino rims via double butted DT spokes to 14mm black ano'd nipples front and rear. I was an early investor in these new RacInc's and waited months until the Container ship logjam in San Pedro, CA. was cleaned up to get it. I think I got box 154 or something. Anyway the early adapters they devised for the rear drop-outs were completely bogus and made the bike unrideable due to slipping in the droputs. So for at least another month it sat half while I searched for a solution with RaceInc to which there wasn't a timely one if you got one of the first bikes. So I looked and looked at options to use the drop-outs as intended, with 20mm hubs. The Profile Elites are insane and loud and actually make the bike super snappy.

 

[Captain Awesome]

I haven't been around these parts in awhile, funny how full time jobs do that anyway here's one...View attachment 250141
View attachment 250142
View attachment 250144
View attachment 250145
I put different bars, pedals, sprocket, wheels, grips, and saddle on it from stock and it is currently torn down and being stripped of paint, which is a lame time consuming job BTW, and awaiting a new look. I'll post a photoof the in progress soonish.

I laced 20mm Profile Elite Hubs to Sun Rhino rims via double butted DT spokes to 14mm black ano'd nipples front and rear. I was an early investor in these new RacInc's and waited months until the Container ship logjam in San Pedro, CA. was cleaned up to get it. I think I got box 154 or something. Anyway the early adapters they devised for the rear drop-outs were completely bogus and made the bike unrideable due to slipping in the droputs. So for at least another month it sat half while I searched for a solution with RaceInc to which there wasn't a timely one if you got one of the first bikes. So I looked and looked at options to use the drop-outs as intended, with 20mm hubs. The Profile Elites are insane and loud and actually make the bike super snappy.

Very nice

 

[Otto (Spelled Backwards)]

Here's my Big Ripper

 

[GTHOtrod]

My 26s on 29s

Redline PL26

Monza 26

 

[ingola]

My 26s on 29s

Redline PL26View attachment 250756

Monza 26
View attachment 250757

Seen one of those monzas at our local bike shop not going to lie I pet it till the sales lady asked me to leave.

 

[ingola]

S&M ATF 29.

View attachment 285534

View attachment 285535

@Captain Awesome you see that

 

[Captain Awesome]

@Captain Awesome you see that

 

[MattiThundrrr]

The proportions are so perfect. I'd love to see a picture it in a lineup of sizes, compare it to a 20, 24, and 26" BMX. I can't believe I'm saying this, but it's even better looking than the Quadangle it replaced

 

[ingola]

The proportions are so perfect. I'd love to see a picture it in a lineup of sizes, compare it to a 20, 24, and 26" BMX. I can't believe I'm saying this, but it's even better looking than the Quadangle it replaced

Much better

 

[BDC]

So I know what was bothering me about the Bullseye pedals on the S&M. They were a bit shabby. I hit the powder coat on the cages with paint stripper and gave them a good polish. Now they sit better with the build. More appropriate.

The Cult half link chain needs to run a bit slacker that I prefer, but even with a brand new sprocket it has a moan if tighter - 1/8 v 3/32.

I put a S&M metal head badge on it. It's only DS tape-ed currently. I'm not entirely sure about it. It's pewter and won't polish any brighter (I tried).

It's too formal against the rest of the 'Marker Felt' graphics - which are only vinyl stickers on top of the clear. Because changing them. Which is cool.

SO I might de-sticker and pinstripe (tape) instead. Undecided.

I also added a polished stem bolt. It's the first bike I've had with a thread cut on the inside of the steerer tube and a M24 screw in lieu of a fangle.

Still coming:
- Anno Red stem bolts x 6.
- Better quality chain tensioners.

 

[carterz]

Here is my 29” Hustler and is currently up for sale.

 

[BDC]

The Salt Stem Bolts colour-match nicely.
Now just waiting on better chain tensioners.

T' bike's name going forward will be 'Credence' AKA the ATF.

 

[BDC]

Painted the Bullseye Bear Trap pedal centres with Dupli-color Metalcast Red and they come up great.

 

[BDC]

​

 

[GTHOtrod]

​

Nice build