I bought this Huffy klunker from bigcam for $30. It was perfect for what I wanted, a cantilever frame that I didnt mind cutting up to do something radical to. My uncle gave me his wire feed welder (no gas) so I brought it to ElChupacabra's house where I had a place to weld. While i was at work the day before I was trying to envision what I could do to the bike and sketched out a low-slung beast with only a couple inches between the bottom bracket and the ground, but not a burrito. I decided the best way to basically 'body drop' the bike was to cut the chain stay/seat stay/rear dropout section off of the bike and flip it upside-down. The front will have a home made leaf spring springer fork that will kick the front wheel up and out. Since the bottom bracket will only be a few inches from the ground I'll be welding on a second BB on the front of the bottom tube. On to the pics of what I have started:
the start
disassembly
notice the bike is upside down in this pic
initial mockup
the start
![fs6.jpg](https://proxy.imagearchive.com/ef6/ef61e183cbb9a3008c4e5a8047ce21b6.jpg)
disassembly
![P1013861.jpg](https://proxy.imagearchive.com/dcd/dcddcf15df5b0762863242c181ab0d41.jpg)
![P1013862.jpg](https://proxy.imagearchive.com/a8d/a8d0828a476fc63e78320f3b1a30ad8f.jpg)
![P1013865.jpg](https://proxy.imagearchive.com/094/094a8ce2c05fff1c6dad31ddb6af9866.jpg)
![P1013866.jpg](https://proxy.imagearchive.com/4a6/4a645872f02dd3d2dd363a899b727e75.jpg)
![P1013876.jpg](https://proxy.imagearchive.com/90a/90a2cfd9a0c7bf681313ca688056362d.jpg)
notice the bike is upside down in this pic
![P1013880.jpg](https://proxy.imagearchive.com/142/14262c20c9dcc997a57fc50d2570ccf0.jpg)
initial mockup
![P1013868.jpg](https://proxy.imagearchive.com/f7b/f7b3bd2586937a04bc24a0f506fbd571.jpg)
![P1013869.jpg](https://proxy.imagearchive.com/793/793092e652a19efc256915cd35819adf.jpg)
![P1013872.jpg](https://proxy.imagearchive.com/c2f/c2fe84c5ad14cf05d37b19639b9908dc.jpg)