Make a deck for it and concentrate on the rest f the bike. Finish the weenie box post- build off. Build a cargo trike for the deadlines ne n 14 days.
B0-X----- WEENIE WAGON -----B0-X
- Thread starter Funkme
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Long way to go,but I spent all day on it today.
I found these washers either from my pajero or off a electric cable wheel.They make great little caps.
I made another double hub for the new rear wheel.Slice the thread from a another old hub.
Fits perfect on top.
Welded it on.
Welded on part of a old fork for the steering
I was going to weld one nut on the frame,but don't think I need to now.I will double nut.
When I am always working 1 of my dogs always lays under my feet.Sparks are flying and he still doesn't move.
Broke a disc today,lucky I had hold of the machine.
Managed to weld on the rest of the tray,the sides bits are 80cm but cut them down to 68cm.
If it doesn't work,I could always turn it into a table with a brolly holder.
A look at the wheel with the band brakes mounted. It's a bit wider than the other one. I could slice off a few cm's,but dont think it will make much difference.Need to fix the rear section,looks a bit out of line.
A look with the fancy scrolls welded in,also a idea of the foot brake and steering position.
Most of the parts I am using are from off this bike,seatpost etc. Maybe I might put a smaller crankset on it?
Have this old motorcycle brake,will try and get that mounted somehow.
The tray is the right height,also with the cooker.
Made it 100cm so that I can fit a gas bottle in,also,room for buns and a esky/ice chest for the weenie's
Things left to do on the front tray:
1-Mount handles for the steering.(weld)
2-Make a brolly and light mounts (weld)
3-Make the wood box,floor,doors,lid + guards.
4-Paint box: Will be red but was thinking to do the tray frame black or red,still need to decide.
5-Paint the graphics.
Things to do on the frame:
1-Sort out the foot brake lever(weld)
2-Suicide shifter mount(weld)
3-Fix the rear end
4-Mount a hand brake lever
5-Paint.
Wheels need to be sprayed and greased.
I found these washers either from my pajero or off a electric cable wheel.They make great little caps.
I made another double hub for the new rear wheel.Slice the thread from a another old hub.
Broke a disc today,lucky I had hold of the machine.
Have this old motorcycle brake,will try and get that mounted somehow.
Things left to do on the front tray:
1-Mount handles for the steering.(weld)
2-Make a brolly and light mounts (weld)
3-Make the wood box,floor,doors,lid + guards.
4-Paint box: Will be red but was thinking to do the tray frame black or red,still need to decide.
5-Paint the graphics.
Things to do on the frame:
1-Sort out the foot brake lever(weld)
2-Suicide shifter mount(weld)
3-Fix the rear end
4-Mount a hand brake lever
5-Paint.
Wheels need to be sprayed and greased.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Here's a small walk around.
As you can hear it is windy.
As you can hear it is windy.
Thanks for the video update... it's looking good. 
Sounds like you've picked up a bit of a Greek twang in your accent... you must've been there a while.
Glen.
Sounds like you've picked up a bit of a Greek twang in your accent... you must've been there a while.
Glen.
Great video! Love you workshop area...
Luke.
Luke.
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
I liked the video! Next time show us your face and also use a wind screen. 
You got a lot done today Miss Funk!
I like the scrollwork. Kepp on plugging away at it.
Cool to see the video of your space!
I like the scrollwork. Kepp on plugging away at it.
Cool to see the video of your space!
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Awww mate,20 years or so ya know.Thanks for the video update... it's looking good.
Sounds like you've picked up a bit of a Greek twang in your accent... you must've been there a while.
Glen.
Actually I have never really had the aussie twang.But when I am around aussies my accent comes out more.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Bit cold and airy in the winter,sticky at the moment from the mulberries dropping down. But cool in the summer.The hay bales stop the wind when I pile them up.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
The wind keeps the place cool,without it.Its like being inside a fireplace.I liked the video! Next time show us your face and also use a wind screen.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Thanx KF,not use to talking to myself or filming.But if Luke can do it
I purchased a new camera still waiting for it to arrive?
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
The frame is all sanded,so I need to apply a coat of primer before the surface rust starts again.Here it happens over night.
I will paint it with good old fashion minio paint first.
Stops rust brilliant product.
I will paint it with good old fashion minio paint first.
Stops rust brilliant product.
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
I'm still in and progressing slowly.
In the end I just found a old metal primer,and slapped that on without thinner?
Have been busy with work and was about to pull out of this rat race,but I am pushing it for now.
The heat is a stinker,and the pc is being stubborn.
I widen the top part of the rear stay and reweld the bar in.And was trying to figure it out why the bike lent to the left.
I scratched my head tried bending it straight etc.
In the end the tire was down on the left side,
Bent some plumbing tube for the handles.
Sorted out the brake system.Has 2 brakes.
The foot brake wich is attached to the band brake.And will have the normal old school brakes that came with the bike.
Used the pedal from a old motorbike with a spring.
Cut the wood for the box,I'm thinking to leave it natural instead of painting it a color?
Just using old wood that is ment to look like bamboo.It's light so does the trick.
Undercoat with a metal primer,even purchased the thinner....I was in such a rush,and being a sunday yesterday.I just slapped it on.
The red.
The gold.
The hub caps before.
After
The hotdog?
All I need to do is paint.
Finish the wood for the box + Graphics.
Weld the handlebar on and brolly holder.
Mount lights.
Mount it all together.
If I can get the hotdog box up and running,even better.
But for now,just want to finish the bike.
In the end I just found a old metal primer,and slapped that on without thinner?
Have been busy with work and was about to pull out of this rat race,but I am pushing it for now.
The heat is a stinker,and the pc is being stubborn.
I widen the top part of the rear stay and reweld the bar in.And was trying to figure it out why the bike lent to the left.
In the end the tire was down on the left side,
The foot brake wich is attached to the band brake.And will have the normal old school brakes that came with the bike.
All I need to do is paint.
Finish the wood for the box + Graphics.
Weld the handlebar on and brolly holder.
Mount lights.
Mount it all together.
If I can get the hotdog box up and running,even better.
But for now,just want to finish the bike.
Attachments
SOOOO Glad that you are still plugging away. I was just about to send a search party out for you.
I know you can finish!!!!!
I know you can finish!!!!!
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
I can't even find myself,so a search party would have no luck...
page 4 at the end of a build?
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
You can do it!
Love the video. It's looking good. Is that hot dog the seat? LOL! I want 2 dogs, please!
Funkme
𝐰𝐰𝐰.𝐟𝐫𝐮𝐢𝐭𝐜𝐚𝐤𝐞.𝐧𝐮𝐭
Ahhh the hotdog
Nothing says FUN like this Weenie Wagon.
