Bike change: Stretch Armstrong

[FLAT BLACK KUSTOMS]

(This is a project that I started and never got past the mock up!) I have been kicking around a few ideas on what kind of bike to build for this BUILD OFF #6 and I think I have a winner ! I have been collecting parts and I finally can start this thing ! I'm not sure how to mount a MULLET on it though ! LOL!

 

[herr_rudolf]

Re: New build: Project nirve.

Nirves are cool.
Hurry up, good luck, and have some fun!

 

[FLAT BLACK KUSTOMS]

Stretch Armstrong!

I started with a beat up 20" full suspension bike.....chopping off the swing-arm ! I have built a bike similar to this idea, but it was a 26" stretch with a standard 26" frame!

 

[FLAT BLACK KUSTOMS]

Stretch Armstrong!

Next thing to do is get the frame in order.....Schwinn exercise bike that I had sandblasted ! I will be attaching the swing-arm to the exercise bike frame, making it as low as possible.
I went out and did a little bit of hacking/chopping and bending on the frame. This what I have come up with so far! I am going to try and use as many parts from the exercise bike as possible, such as : forks
speedometer
handlebars
cranks
pedals.....you get the idea !
This is just a mock-up, everything is just sitting. Nothing is welded!

 

[gowjobs]

Re: O.G. BMX RE-VISITED!

Love the old-school BMX cruisers... and knobby-tired choppers, too.

 

[FLAT BLACK KUSTOMS]

Stretch Armstrong!

I switched the fork legs around so the dropouts were facing forward or up...when it is all stable and bolted together it will be sooooo low !
I will be cutting the forks & re-positioning/welding the upper fork legs ...When this is done, I can use the plate that came with the exercise bike so I can remount the speedo and make the forks secure! I think I will leave the forks with the stand and make a quick release so I can use it for a kick stand !

 

[FLAT BLACK KUSTOMS]

It was a great day yesterday and I finally got to do a little work on my new project! I was able to cut and reposition the fork legs! It is still @ mock up stage, but coming together. Im not sure about the seat yet either!

 

[FLAT BLACK KUSTOMS]

Once I get the swingarm welded on and in place, I can actually be able to sit on it and and figure out where to put the bottom bracket!

 

[FLAT BLACK KUSTOMS]

Then I should clean my driveway! LOL!

 

[FLAT BLACK KUSTOMS]

I cleaned my driveway.....Now it's on!

 

[yoothgeye]

That's a radical design... the rules may have been bent a little thought. :shock:

 

[inshane64]

rules? what are these things you speak of?

 

[pick]

rules? what are these things you speak of?

Behind every broken rule, is a good excuse!!
:lol: :mrgreen: 8)

 

[Dr. Tankenstein]

I think he is referring to rule #3:
3. Must use factory frame....no altering of original frame structure/geometry

So, that means that this will be the BADDEST exercise bike on the planet!
WOOOOOO!

That's a radical design... the rules may have been bent a little thought. :shock:

Cheers,
Dr. T

 

[Gdcast]

Leave rules to lawers, this is one sick ride for sure, so if you get disqualified at least you´ll end up with a mayor bad a$$ design! :wink:

 

[slow rider]

F the rulls that is one killer build so fare!

 

[FLAT BLACK KUSTOMS]

I havent changed the frame really! It's still an exercise bike frame! Oh well, I'll see what comes of it! Thanks for the props everyone! Thanks!

 

[Fisch]

Man I hear you. I wanted to do a swingarm build for the RRBBO, but hit the same conclusion about altering the frame. I will still build it, but entered something else.

 

[deorman]

Added swingarm's been excepted before. The bent stays kinda tread the line, IMO, especially if you cut off the seat post. :| Cool build, though.

 

[streetpirate]

bump for what happened to this build?