BOTEN/10/X (Indian cycle) Done and dusted!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Last edited:
Tick Tock
Tomorrow is the halfway point.
 
Ploddin away on this one, bits for my tank, cheers!
opogzk.jpg


Off subject but same name, visited an Indian dealership recently, link below,
http://www.ratrodbikes.com/forum/index.php?threads/new-indians-eye-candy.92855/
 
So managed to get a bit done on this one, struggling for time,
work getting in the way of fun and bikes, don't you hate that!
Mock up of tank, some pvc pluming pipe, an old goblet some
glue and a grinder!
x3ybv7.jpg


s4aow2.jpg


Also a bit done on the forks, cut the brace from a bit of steel
that;s previous life was holding a fire extinguisher to a wall.
2d99s3k.jpg


s60gfk.jpg


xm1swg.jpg


The handle bars and chain guard nearly ready for top coat.
20sha2c.jpg


Better get to it, that build off clock she's a tickin.......
 
Less than a month folks, no pressure! Recently added another year to my life,
my wife and kids treated me to a couple of pieces of apparel, lucky me aye!
zkmomh.jpg


9zm345.jpg


On to the bike, not far from top coat, homeward stretch, just need a good
day to lay down some paint!
iwsryw.jpg


2i8ahow.jpg
 
Put this baby together already!!!!!
11 more days
 
Put this baby together already!!!!!
11 more days
Slaving today, winter down here not snowing but it is blowing, has
been a wild winter this year lots of wind and rain, hope I make it!!!!
 
Last edited:
Making a list checking it twice and it’s getting smaller, come across a couple of issues but will nut it out, may have wet paint at the finish time!
op7pu9.jpg


dw5ah5.jpg


Used a tried and tested technique for the indian logo, printed text off net, cut it out, tapped to the tank, draw outline then paint, usually needs a couple of coats.
2hgrdpw.jpg


34j7r7d.jpg
 
Looking super!
 
Back
Top