I'm currently building a burrito to futz around with when I go on paved path rides with my friends. It has a 78" wheelbase and is 8' 9" long overall.
Started out as a ladies 12 speed Spalding...
A few cuts with the right angle grinder, a little tubing, some welding and I've got this...
Some more welding and grinding, test fit of the cranks, plus new handlebars which I lengthened by brazing on pieces of another handlebar...
And my 3 speed "transmission"... an SA 3 speed hub with a cog welded to the drive side spoke flange which I will mount behind the seat tube...
I'll post more as the project continues. :wink:
Started out as a ladies 12 speed Spalding...
![Spalding12speed1.jpg](https://proxy.imagearchive.com/d66/d6695f9923781e929b40b9c758593433.jpg)
A few cuts with the right angle grinder, a little tubing, some welding and I've got this...
![burrito_783.jpg](https://proxy.imagearchive.com/e6d/e6dfb7dbe87ac0b8f5e2b7763d27d2a1.jpg)
Some more welding and grinding, test fit of the cranks, plus new handlebars which I lengthened by brazing on pieces of another handlebar...
![burrito784.jpg](https://proxy.imagearchive.com/388/3886d9e2b157a212e5f5b27425581845.jpg)
And my 3 speed "transmission"... an SA 3 speed hub with a cog welded to the drive side spoke flange which I will mount behind the seat tube...
![3speedSA.jpg](https://proxy.imagearchive.com/ceb/ceb23999561d35f6bb49a8ff89308115.jpg)
I'll post more as the project continues. :wink: