BUTCHERED BANTAM- updated 7-17

[user 135]

The tearing down of this Bantam went like most others, hard nut/bolts on the fenders and always a surprise. This time it was a spilt steertube, but that goes hand in hand with old bikes. I am planning on building this for my sons. I would like to keep the old paint, but the cutting and welding will probably warrant a new paint job. The tank is a convertable bar from an unknown bike. The wheels were fairly crusty rusty on the inside. I used a steel brush to get the loose stuff off then I sprayed with some stuff that stops and coverts the rust to metal- bought at NAPA.

The top girly tube will but cut out and the tank will be fit and welded into place.

 

[sensor]

Re: Butchered Bantam

youre doing what to that poor bike?!?!? :wink:
jk looks like you kids are gonna have a great new bike! that tank looks great and looks like itll drop on with out any problems........cant wait to see more of this one :mrgreen:

 

[user 135]

Re: Butchered Bantam

Received the new fork today( thanks 66olds).

Cut the top bar out and fit the tank. I can get away with bolting the tank instead of welding. I left some of the top bar to bolt in the front and used the seat bolt for the rear. Still trying to come up with a color scheme to paint the whole bike. Also need to figure out some different bars. Some small moon bars would be ideal, if not maybe some small riser/apes.

 

[carolina rat]

Re: Butchered Bantam-pics updated 3/10

Looks pretty cool! Neat idea for the top bar.

 

[sensor]

Re: Butchered Bantam-pics updated 3/10

looks good!how about cream(schwinn ivory) with black scallops and red pins? just about opposite of the schwinn paint jobs....but would still have the right feel and(my $.01)look good :mrgreen: what ever ya do with it though its gonna look nice!

 

[66olds98]

Re: Butchered Bantam-pics updated 3/10

Looks good, Cman! Wish I would have thought of something like that! The moon bars would be cool, just like a mini cruiser 8) Keep it up!

 

[user 135]

Re: Butchered Bantam-pics updated 3/10

Thanks for comments.
66olds i am guessing Electra would have that type of bars.

CarolinaRat- the top bar I bought not knowing what to do with it until I trade 66olds for this Bantam.

Sensor, I am no Micheal Angelo, but the sounds good. I am thinking about painting the frame, tank, fork and chainguard all the same color then accent strips or scallops on the tank and chainguard. I was in the garage and though about matching the wifes bike that is burgundy with cream.

 

[sensor]

Re: Butchered Bantam-pics updated 3/10

thatd be cool! (whew...thought about the combo i suggested and got to thinking itd look good on the kids build im doing :roll: )
guess i will use it now :roll: i still love your wifes bike!

 

[KOTA]

Re: Butchered Bantam-pics updated 3/10

What did you do with the fenders? $$$

 

[user 135]

Re: Butchered Bantam-pics updated 3/10

What did you do with the fenders? $$$

I have them and hadn't decided yet. If they do go on the bike they will be bobbed :shock: I figure I cut the frame why not the fenders :lol: .

Hmmm. What kind of $$$$?

 

[KOTA]

Re: Butchered Bantam-pics updated 3/10

What did you do with the fenders? $$$

I have them and hadn't decided yet. If they do go on the bike they will be bobbed :shock: I figure I cut the frame why not the fenders :lol: .

Hmmm. What kind of $$$$?

The back fender on the PhantomBantam Is pretty beat up. I,m going to put the "front" fender in the rear, and bob the rear fender for the front. Hopefully I don't mess it up, but if I do......... :roll:

 

[user 135]

Re: Butchered Bantam-pics updated 3/10

Kota , my rear fender is beat up too.

Not much progress. Shined up the chrome rims, new tires, grips. I decided not to paint the frame as the red is not bad and I like old Scwhinn paint. I am painting the tank. It will be a Hammered silver with red stripes in the center. Gonna tape the stripes on tomorrow and paint the silver on .

 

[KOTA]

Re: Butchered Bantam-pics updated 3/10

Cool! I'm planning on using the hammered paint on my rims and bars, never used it before, can't wait to see how it looks. it would be much appreciated if you share any "tricks" or techniques on that type of paint!

 

[sensor]

Re: Butchered Bantam-pics updated 3/10

okay...........ya got me!
whats hammered paint?!?(im guessing not the stock beat to heck paint :wink: )

 

[user 135]

Re: Butchered Bantam-pics updated 3/10

okay...........ya got me!
whats hammered paint?!?(im guessing not the stock beat to heck paint :wink: )

Hammer the rattle and see what happens. :mrgreen: :mrgreen:

http://www.rustoleum.com/CBGProduct.asp?pid=29

 

[sensor]

Re: Butchered Bantam-pics updated 3/10

ahhhhhhhhhhh........thanks

 

[user 135]

Re: Butchered Bantam-pics updated 3/21

Masked the strips on the tank. Simple Stripes but I think they look great.

Painted with the "hammered"paint but didnt look too much like the can. That is alright as I like the metalic look.
Pics not great but those will come later.

 

[sensor]

Re: Butchered Bantam-pics updated 3/10

nothing wrong with simple(like i was always told give it a kiss*keep it simple stupid* by one of my old bosses)
looks good so far(side note i WASNT calling anyone stupid) :mrgreen:

 

[ParkRNDL]

Re: Butchered Bantam-pics updated 3/21

hey as simple as that pattern is, i like it... i might borrow and adapt it if that's ok...

--rick

 

[user 135]

Re: Butchered Bantam-pics updated 3/21

Sensor- I am a firm believer in KISS.

ParkRNDL. No problem. There are only so many things you can do with masking tape. As for DUct tape, that is a different deal.