CyCLo KiLLeR - Last minute details, and a teaser!

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
1630204233032.png
 
Got the “brake discs” officially installed and bloodied:

FBC65968-276F-430D-8CE2-FFBA70539F15.jpeg



Found a place to mount the arrows. This is one of those things I thought about forever, but when I went to do it it just wasn’t going to work as planned. I thought this was a nice solution though:

3378C1E7-A054-46AB-914D-790C5740A3E2.jpeg


Got some nails in the bats for good measure. Turns out barbed wire is rather difficult to find, especially if you just need a little bit of it. This turned out to be a lot easier and probably just as effective:

72C36E3A-71DC-404C-846C-8879B70F6D75.jpeg



Got my photo shoot done, but it’s going to take a little time to resize and upload to my “finished” thread. Here’s a little teaser outtake though:


7F8B4E1E-E953-43EC-90E2-6701FA0FE896.jpeg
 
CONGRATS on a "KILLER" build!!!!
 
Back
Top