Well I found out last night that the stock Yamaha Moto-bike can take 24" wheels and tires really easy (Normally 20"). This makes the stock frame a bit more interesting size-wise.
The tank in the pictures would be replaced with a cafe one naturally.
I think if you ran an expansion chamber pipe to fill the space in front of the down tube. It would help.
I just bought a set of these forks, and 12" shocks which will raise the rear a bit from the 10" that are stock.
http://www.bmikarts.com/item/Fork-Assembly-300160-1440
I also saw this on motorbicycling showing an engine will fit this frame. Tiiiiight though!
Now I am posing on it again. Looks a little better than the shot on the first page! Still small though. But I guess no smaller than the cafe moped guys at this point.
The tank in the pictures would be replaced with a cafe one naturally.
![IMG_5442.jpg](https://proxy.imagearchive.com/ca8/ca86f2ff0affd028ef40d700d9b5de6f.jpg)
I think if you ran an expansion chamber pipe to fill the space in front of the down tube. It would help.
![434573131_o.jpg](https://proxy.imagearchive.com/1ed/1ed3633f1f4628992fbc343e5d08921e.jpg)
I just bought a set of these forks, and 12" shocks which will raise the rear a bit from the 10" that are stock.
http://www.bmikarts.com/item/Fork-Assembly-300160-1440
![4519.jpg](https://proxy.imagearchive.com/ce6/ce60f5a2389b5c020c7f68bf1d9abcc2.jpg)
I also saw this on motorbicycling showing an engine will fit this frame. Tiiiiight though!
![MotorizedMoto.jpg](https://proxy.imagearchive.com/ddf/ddfb3dc7883b10687020695bb4b06338.jpg)
Now I am posing on it again. Looks a little better than the shot on the first page! Still small though. But I guess no smaller than the cafe moped guys at this point.
![IMG_5444.jpg](https://proxy.imagearchive.com/dc5/dc5a6827871398a45ef0aed0b3713ad4.jpg)