Hey everybody, been a little while since my last build and thought I would share my latest project.
Full custom build from scratch 4 wheels, 2 wheel drive (differential) rear mid drive bafang motor. still a work in progress but rideable for testing.
Started off mocking up the jackshaft set up.
Started on the front end build.
First rolling mock up.
Here's where im up to at the moment, Tried gears but torque kept bending sprockets.
So went single speed to fix the issue.
Full custom build from scratch 4 wheels, 2 wheel drive (differential) rear mid drive bafang motor. still a work in progress but rideable for testing.
Started off mocking up the jackshaft set up.
![346612546_1192687128109548_3232362393176241336_n.jpg 346612546_1192687128109548_3232362393176241336_n.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/232/232371-346612546-1192687128109548-3232362393176241336-n.jpg)
Started on the front end build.
![346487198_2556479907984063_5975596391162069203_n.jpg 346487198_2556479907984063_5975596391162069203_n.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/232/232374-346487198-2556479907984063-5975596391162069203-n.jpg)
![346637041_3131039873859907_6816192425413397311_n.jpg 346637041_3131039873859907_6816192425413397311_n.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/232/232373-346637041-3131039873859907-6816192425413397311-n.jpg)
First rolling mock up.
![346940633_633663968686503_7299490337314277148_n.jpg 346940633_633663968686503_7299490337314277148_n.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/232/232372-346940633-633663968686503-7299490337314277148-n.jpg)
![346294946_979677969833860_420158425176719488_n.jpg 346294946_979677969833860_420158425176719488_n.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/232/232375-346294946-979677969833860-420158425176719488-n.jpg)
![346631846_1638823913268921_4413456683779906828_n.jpg 346631846_1638823913268921_4413456683779906828_n.jpg](https://cdn.imagearchive.com/ratrodbikes/data/attach/232/232377-346631846-1638823913268921-4413456683779906828-n.jpg)
Here's where im up to at the moment, Tried gears but torque kept bending sprockets.
So went single speed to fix the issue.