Leg Day

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
I finally decided to take the plunge and enter this year's Build Off. Nothing extravagant, but if I pull this off Leg Day should turn a few heads in my one-stoplight county. My plan is to take a Worksman INB frame(thanks again @ind-chuckz )and weld in a new bottom bracket far enough forward that a 65t chainring will clear the chainstays. This will probably get a single speed coaster brake and a bent springer fork. Not sure about the last bit though.
13123087_985324608241955_5082973217393037655_o.jpg

13217522_985324621575287_3849443215586531141_o.jpg
13173057_985324638241952_3417311200269809881_o.jpg

I'm naming it Leg Day cause I reckon just trying to get this thing in motion is gonna be a workout.
 

OddJob

Staff member
Moderator
Pro Member
Joined
Mar 26, 2012
Messages
10,050
Reaction score
21,713
Location
Maplewood, MN
Sweet! Love the big ring! Welcome to the fray! You've got some good company down there in Peachville......Kingfish and Dr Tankenstien to name a couple! Rat on....
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
Sweet! Love the big ring! Welcome to the fray! You've got some good company down there in Peachville......Kingfish and Dr Tankenstien to name a couple! Rat on....
Yeah, Kingfish sold me the forks I originally wanted for this bike even before I decided to put it in the build off. Unfortunately my wife appropriated them for HER Worksman. Oh well, it just opens the door for bigger and more ridiculous things.
 

kingfish254

CHECK OUT MY SALE THREAD FOR COOL STUFF!
Pro Member
Joined
Aug 31, 2009
Messages
31,733
Reaction score
39,167
Location
Historic Savannah
Glad to see you join in the fun Josh.
Another possible option to get that monster sprocket to clear is to try and use some spacers between the sprocket and the bearing race.
I like that frame a lot.
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
Glad to see you join in the fun Josh.
Another possible option to get that monster sprocket to clear is to try and use some spacers between the sprocket and the bearing race.
I like that frame a lot.
I tried it about a year ago on Sandra's bike. It threw the chainline off further than I was comfortable with.:( Besides, how much cooler will it be with some extra parts thrown in?;)
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
Didn't get a chance to really work on Leg Day today, but I kicked up a piece of aluminum diamond plate that would make a good tank plate I'm thinking. If I wanted to sandwich 2 pieces together so it would be patterned on both sides, what adhesive would be good for that? Kinda new to making this kind of stuff.
 

OddJob

Staff member
Moderator
Pro Member
Joined
Mar 26, 2012
Messages
10,050
Reaction score
21,713
Location
Maplewood, MN
Josh, I use Goop for most of my bike / car adhesion needs. Available at Home Depot, hardware stores, etc. Dries fast, holds well, lasts long....
goop.jpg
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
I have a feeling this is gonna go very slowly until the very end, and then everything will be thrown together last minute. Anyhoo, I got the tank plate pieces cut out of the diamond plate today, but forgot to picture them. I'll take some tomorrow. Still trying to chase down a welder.
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
After looking at the pieces mocked in place, I'm not as enthusiastic about the diamond plate as I was earlier. But I will wait til the rest of the build is finished and see how it looks before nixing them.
13243947_993327990774950_2557702786859398534_o.jpg

I cut mirrored pieces so it would be face out on both sides.
13254900_993327984108284_4883319866386450067_o.jpg

The pieces are still a little too big, but after the left and right sides are glued together I'll file everything to a good fit.
 

kingfish254

CHECK OUT MY SALE THREAD FOR COOL STUFF!
Pro Member
Joined
Aug 31, 2009
Messages
31,733
Reaction score
39,167
Location
Historic Savannah
I'm actually really digging both pieces a lot. I don't think I've seen anyone do a lower section like that. And the Higgins-esque curve to it is cool.
 

kingfish254

CHECK OUT MY SALE THREAD FOR COOL STUFF!
Pro Member
Joined
Aug 31, 2009
Messages
31,733
Reaction score
39,167
Location
Historic Savannah
One possible enhancement though. The angle of the diamond lines isn't the same between the upper and lower halves.
 

The Renaissance Man

__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Joined
Nov 24, 2012
Messages
8,799
Reaction score
22,656
Location
The Tropics of Alabama
It's good to see someone using a file. To many people reach for the power tools and miss out on the connection of feeling the work with your hands.

I like the shape of the bottom tank half! It does look 'Higgins-esque' as Brian pointed out.
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
Thanks for the comments and suggestions! I think once Leg Day is painted and built the tank pieces will look more at home.
One possible enhancement though. The angle of the diamond lines isn't the same between the upper and lower halves.
Yeah, I wasn't thinking about that when I started tracing out my pieces, and there's not enough of the sheet left to cut more. :doh:
 
Joined
Aug 16, 2011
Messages
438
Reaction score
416
Location
Southeast Ga
It's good to see someone using a file. To many people reach for the power tools and miss out on the connection of feeling the work with your hands.

I like the shape of the bottom tank half! It does look 'Higgins-esque' as Brian pointed out.
I'm quick to grab a grinder or jigsaw for basic cutting, but I like to finish with a file because if I slip with a file it won't trash my frame like a grinder will (learned the hard way).
 

Latest posts

Top