Fv2
Don't know what I'm doing, gonna do it anyway.
Looks like no update this weekend, to much family stuff happening.
But the good news is the cubs won tonight.
(MBBO#05 Class 2) J.C. Draggins..... Finished
- Thread starter Fv2
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
But the good news is the cubs won tonight.
Fv2
Don't know what I'm doing, gonna do it anyway.
Ok, so holy crap the cubs made it to the series. I'm happier than a pig in mud.
Now onto the bike.
Started working on the forks, I have no gas for my welder so I'm using flux core for the first time. Its messy, but I got the drops tacked to the legs.
Welds aren't perfect
But they'll do for now, which means I'll redo them.
The reason why?
No clearance
Besides, the fork tubes kinked a little. So I'll replace them.
I just have to decide if I want to flatten the ends or move the drops closer to the side of the tube.
Sent from my LGL34C using Tapatalk
Now onto the bike.
Started working on the forks, I have no gas for my welder so I'm using flux core for the first time. Its messy, but I got the drops tacked to the legs.
Welds aren't perfect
But they'll do for now, which means I'll redo them.
The reason why?
No clearance
Besides, the fork tubes kinked a little. So I'll replace them.
I just have to decide if I want to flatten the ends or move the drops closer to the side of the tube.
Sent from my LGL34C using Tapatalk
Fv2
Don't know what I'm doing, gonna do it anyway.
This is where I'm at, if I weld to the side of the fork leg. That leaves the holes in sight and fits with the chain ring and guard I'm using.
If I flatten and weld inside the tube, it gives a more traditional feel.
Sent from my LGL34C using Tapatalk
I say RaT oN and go for option #1...no holes barred!
Fv2
Don't know what I'm doing, gonna do it anyway.
Cut holes in the lower tree for fork tubes.
That was a brand new hole saw, not sure what I did wrong. But I'm off to get a new one... two measly holes.[emoji90]
Sent from my LGL34C using Tapatalk
That was a brand new hole saw, not sure what I did wrong. But I'm off to get a new one... two measly holes.[emoji90]
Sent from my LGL34C using Tapatalk
Maybe try some oil and go slow. That looks like a fairly thick chunk to be getting through with a hole saw tho.
Fv2
Don't know what I'm doing, gonna do it anyway.
Oil might help. I had to go slow, saw is listed as 350rpm; drill is 850.
I got a new saw, but it was defective. Will try again Wednesday.
Check what that hole saw is made for...
Wood I think if it's like all of mine, doors and such, vinyl or aluminum wrapped wood core, same difference. But not plate steel! Wow.
Carl.
Here's the Ultimate Handyman! 
Fv2
Don't know what I'm doing, gonna do it anyway.
The first saw was specifically for steel, the second was bi-metal. It hit the steel and immediately started to wobble.
I guess that the difference between $15 and $6.
I'll get a new steel saw and finish it up.
I'm still at a breaking point with bikes, but I've gotten a fire to finish this one. Mostly because I want a muscle bike I'll ride.(stormtrooper sits in a corner)
Next time you get plates cut it might be worth get the holes cut at the same time!
Luke.
Fv2
Don't know what I'm doing, gonna do it anyway.
Absolutely, the only problem here is... I didn't know where the holes needed to be.
Next time you get plates cut it might be worth get the holes cut at the same time!
Luke.
Definitely making better plans next time.
Cubs fan in Ohio?
What about those Indians?
Merle.
What about those Indians?
Merle.
Fv2
Don't know what I'm doing, gonna do it anyway.
Born here, moved back many times, never considered myself from here.
Never lived in Chicago, not a fan of cities... but been a lifelong cubs fan.
Was interesting growing up, my mother... a twins fan.
Hmm, I was born in Chicago. Moved south when I was a toddler (my parents made me come with them) I'm a football fan but it's cool, some of my friends been Cubs fans forever.
Carl.
Looks cool. You get all the holes done?
Fv2
Don't know what I'm doing, gonna do it anyway.
Yup, new saw and cutting oil worked great. And I still have a good hole saw.
Just finished welding the steer tube to the lower tree, waiting for it to cool so I can smooth the weld.
Sometime today I'll post a pic of a roller.
