I'd love some pictures and get some dimensions to see if it'll work. Thanks!
Sent from my iPhone using Tapatalk
Mint Julep
- Thread starter PublicNuisance
- Start date
-
- Tags
- bourbon build off colson mint julep
Help Support Rat Rod Bikes Bicycle Forum:
I'd love some pictures and get some dimensions to see if it'll work. Thanks!
Sent from my iPhone using Tapatalk
Slow and steady!!! Finished making the lower rear-steer parts and they fit like a charm. I'll still be using the skip-tooth sprocket on the front... time to make the main tube, linkage rods and connectors! I was also able to spend some time on the Eclipse / Morrow rear hub and it's cleaned up and rebuilt.
I'm "adapting" some left-over race car parts for the rear-steer system. This is starting to become the standard approach for my builds... blending modern and vintage while trying to preserve the period look and feel. This time I'm using a water flange for a Garrett race turbo and a trimmed control arm bushing to function as part of the rear-steer hardware.
Nice and snug like it was made for it!
All cleaned up and rebuilt - ready for another 84 years of service hopefully!
Saddles and grips from Thompson
I'm "adapting" some left-over race car parts for the rear-steer system. This is starting to become the standard approach for my builds... blending modern and vintage while trying to preserve the period look and feel. This time I'm using a water flange for a Garrett race turbo and a trimmed control arm bushing to function as part of the rear-steer hardware.
Nice and snug like it was made for it!
All cleaned up and rebuilt - ready for another 84 years of service hopefully!
Saddles and grips from Thompson
A little more progress today. Since finding the original eccentric bottom bracket and 2-piece crank are virtually impossible, I have decided to fab up a skip-tooth jockey wheel 
The pictures are from the mock-up phase and look like things should work really nicely! I just need to order the bearing and tack it to the sprocket and then mount it to the frame
Old chain tensioner with guts removed and nylon bushing pressed in.
7-tooth skip-tooth sprocket
Placeholder for the sealed bearing
Looks like we have a plan!
1" billet roll bar clamp should make a perfect mount.
The pictures are from the mock-up phase and look like things should work really nicely! I just need to order the bearing and tack it to the sprocket and then mount it to the frame Old chain tensioner with guts removed and nylon bushing pressed in.
7-tooth skip-tooth sprocket
Placeholder for the sealed bearing
Looks like we have a plan!
1" billet roll bar clamp should make a perfect mount.
Super parts...ought to be a very pretty build.
Got the bearing and SS bolt in today - can't decide if I'll need the arm or if I can get enough adjustment without it.
Love tandems and this looks like it's going to be a sweet one. Eccentric bottom bracket on the original? Didn't realize those had been around that long. Nice work on the tensioner.
Yup - the original had a two-piece crank and eccentric BB. Those are super hard to find without buying a complete bike. Hopefully this approach will be in concert with the finished bike!
Sent from my iPhone using Tapatalk
Man that seat is awesome, never seen one like that.
Today was a good day I love it when the FedEx guy brings things!
Some nice flat fender braces to go with the fenders from Woody's!!
Sent from my iPhone using Tapatalk
I love it when the FedEx guy brings things!Some nice flat fender braces to go with the fenders from Woody's!!
Sent from my iPhone using Tapatalk
That tensioner is awesome, but those Woodies fenders are gorgeous!
I made some flat fender braces out of 1/8" x 1/2" steel. They bend well, are very rigid, and age nicely as a raw steel. And most of the time we don't care about weight, so we don't need the 'weight weenie' tiny rods that came stock on those!
Yeah - they are pretty for sure - look even better in person too. Can't wait to get the frame off to paint so I can see how everything looks together!!
Those fenders are gonna pop when the mint paint goes on.
I can already tell this build is going to full of cool little details.
I can already tell this build is going to full of cool little details.
Got the rear fender mocked up and I'm super happy with how it turned out! I went with the braces for 28" wheels so I can mount them over the fender for some added detail. Time to pick out some cool hardware for them!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
MazdaFlyer
Like “RadioFlyer”
I'm lovin the fenders!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
The Renaissance Man
__CERTIFIED DIVER__ (Open Water & Open Dumpster)
Staff member
Moderator
Pro Member
What about some type of small compression springs instead of the spacer? Just thinking out loud.
What about some type of small compression springs instead of the spacer? Just thinking out loud.
Could be cool - food for thought
Sent from my iPhone using Tapatalk
MazdaFlyer
Like “RadioFlyer”
I have a set of fenders with outside braces with metal spacers and leather washers to absorb vibration.What about some type of small compression springs instead of the spacer? Just thinking out loud.
Sent from my iPad using Tapatalk
Got tiny bit done today, hopefully the weekend will bring more progress! Decided to go with a drum brake for the front to help with the stopping efforts. Will post pics as soon as the forum lets me
Before
After - getting there!
Before
After - getting there!
Last edited:
