mongoose beast crankarms

[bentpimp]

what crankarms besides truvativ e4001's fit the mongoose beast?can't find them anywhere...

 

[Cuttlefish]

Plus 1. Also are most people swapping out the BB as well?
The 46 and 48 teeth single speed cranksets are abundant and cheap but 32 teeth are like...well like hen's teeth.
If using a 46 tooth front how many teeth on the rear sprocket to get the same ratio as a 32 front with 20 rear?

 

[blown240]

Why not just get a MTB crankset and remove the rings you don't want? There are lots of MTB cranks that would work.

 

[Cuttlefish]

Thanks for that.
I'm more used to figuring out what fins work with a surfboard than swapping parts on bikes so out of my depth, pardon the pun.
Now I have heaps more options.

 

[blown240]

Just look for a "low profile" square taper Crank. Or basically anything made after 1995

 

[Cuttlefish]

So this one or similar?
http://www.ebay.com.au/itm/111478273619?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

 

[blown240]

Thats not square taper, so it won't work with your bottom bracket. More like this: http://www.amazon.com/Shimano-FC-M3...799354&sr=8-2&keywords=crankset+mountain+bike

 

[blown240]

This one would probably work, you would have to get chainrings and bolts...

http://www.ebay.com.au/itm/Andel-RS...pt=AU_Sport_Cycling_Parts&hash=item27ed84fa19

 

[Cuttlefish]

That's great.
Thanks again for your help.
How's about this one?
http://www.ebay.com.au/itm/360904678698?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I didn't know what a square taper was...Excuse my ignorance.

 

[Cuttlefish]

Thats not square taper, so it won't work with your bottom bracket. More like this: http://www.amazon.com/Shimano-FC-M361-Acera-Crankset-170-mm/dp/B002FB2YA6/ref=sr_1_2?ie=UTF8&qid=1412799354&sr=8-2&keywords=crankset mountain bike

Shipping to Australia maybe a drama on this one.

 

[blown240]

That's great.
Thanks again for your help.
How's about this one?
http://www.ebay.com.au/itm/360904678698?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I didn't know what a square taper was...Excuse my ignorance.

Ya that should work. Square taper is where the crank fits onto the bottom bracket spindle.

 

[Cuttlefish]

On a side note I got some new Vee rubber 3.5" Speedster tires which shed some rolling weight from the Beast and they feel great.