- Joined
- Mar 1, 2010
- Messages
- 221
- Reaction score
- 40
Here's a update on the Felt Slater.... I finally finished it!!
I made one of my rear offset steel engine mounts because the aluminum AMPT mount was causing the engine to vibrate too much; while I was at it, I swapped out the engine for a new RAW 'slant head' that I fully ported the inside of. I also made one of my 'lay back' seat posts for it.
I made one of my rear offset steel engine mounts because the aluminum AMPT mount was causing the engine to vibrate too much; while I was at it, I swapped out the engine for a new RAW 'slant head' that I fully ported the inside of. I also made one of my 'lay back' seat posts for it.