my next waste of money.

[Slow-Rider]

first attempt total falter.

will try again when its dry and reprepped

 

[Slow-Rider]

maybe it's do to my forks aren't round?

 

[Slow-Rider]

all the blues blead/blend to gather.

 

[Slow-Rider]

was hopping for this effect

 

[Slow-Rider]

psychedelic baby

before dipping
[video]

after

bars snap pad. snaps are crusted shut i. so left on.

frame turned out so sweet!!!!

re did forks with more orange and white

then scoop out left over paint dump out water clean ups done..

best part no need to sand frame smooth free of scratches or paint chips. this prosses hides / covers them up.

 

[Slow-Rider]

waiting for it to dry then gloss clear it.

 

[us56456712]

I use a wire brush in my angle grinder and then a torch to burn off the stuff you can’t get at.

 

[Slow-Rider]

OK what sprocket should go with the cranks? can't find my 3 arrow so out of these 3. what one should I use?

 

[MattiThundrrr]

Really cool paint effect there, care to share the technique?

* I think the mag sprocket is coolest Schwinn circles second best

 

[Slow-Rider]

Really cool paint effect there, care to share the technique?

* I think the mag sprocket is coolest Schwinn circles second best

simple prosses. get a storage tote/ bucket. large enough for your frame / parts. then pick out some rattle spray bomb cans. in colors you think would look good together. let them sit in the sun warm up. fill the tote/ bucket. with regular tape water. shake the cans up. like I said simple. now spay paint circles / swirls in the water. spray till the color in water. is the shade you like. put on gloves dunk the frame / parts in the tote/ bucket.. shake the parts under water. wait a few minuets swish a way the paint on top of water. pull out frame/ parts. let it dry some were. then take a razer blade cut off the extra paint on bottom bracket hole and head tube.(I Skipped taping those off) so just cut the hole/ tube back open. then do the same for drop out axle slots.

after it's dry build frame up/ install parts. then go ride it!

 

[Slow-Rider]

not felling the Banana seat colors all wrong.. not the wright style Banana seat.
but its getting there. stems in the mail plus other small bits.

 

[Slow-Rider]

the paint can / cap looked the wright color when I bought it. but after spraying it over the chrome, it's lighter than the front hub. still looks nice. gives it a foe / fake anodize look.

 

[Slow-Rider]

getting it closer to done. but the head badge screw don't fit.

 

[Slow-Rider]

look what the mail man dropped off today

 

[Slow-Rider]

 

[Slow-Rider]

 

[Singleton]

Looking at those starting out pictures. Breaks my heart to see a bike in that kind of shape. Even if you don't keep it, glad it's getting fixed up.

Heck with the shortage going on you may even turn a profit if you sell.

 

[Slow-Rider]

still waiting for some of these parts in mail to me.
NOS Permaco 212 Banana Bike Seat...Blue

Genuine Schwinn Approved Bicycle Head Badge/Name Plate

Schwinn 1970 Goose Neck Handlebar Stem

2 Cheng Shin 20" X 2.125" C183 KNOBBY dirt tread old school BMX bicycle tires

Heavy gauge Bendix 76 coaster brake hub. with steel Rim
Sunshine Heavy gauge hub laced to 20X125 CMC chrome steal
rim

1 X OURY CLASSIC BMX FULL WAFFLE BICYCLE GRIPS - BLUE

but dug around the spare parts boxes got it rolling.

 

[MattiThundrrr]

Shoot it looks good already. What's going to happen when the deliveries arrive?

 

[Slow-Rider]

Shoot it looks good already. What's going to happen when the deliveries arrive?