Re: NDN - Mock Up
nice job on the grips.... can't wait to see the bike finished.
nice job on the grips.... can't wait to see the bike finished.
NDN
- Thread starter rat-a-tac
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Re: NDN - Mock Up
thanks for the feed back all! I decided to donate a set of custom grips to the winner of each build off.
http://www.ratrodbikes.com/forum/viewtopic.php?f=1&t=71830&st=0&sk=t&sd=a&start=60#p697979
thanks for the feed back all! I decided to donate a set of custom grips to the winner of each build off.
http://www.ratrodbikes.com/forum/viewtopic.php?f=1&t=71830&st=0&sk=t&sd=a&start=60#p697979
Re: NDN - Mock Up
You got skills! and a cool bike! Nice job!
You got skills! and a cool bike! Nice job!
I need SPACE
i did have to grind the lip down.
i did have to grind the lip down.
Chainring and resin
i should keep this as an ace in my pocket. Google dyeing resin and you can get a ton of ideas. Add rocks, rust and glitter but have fun! This would be really cool on a sweetheart chainring, I have a skip tooth one I may do this to.
I did all the spaces but didn't like the look so I popped them out before they dried. lesson learned, small batches for the bigger spaces. here is one of the pieces I popped out.
i should keep this as an ace in my pocket. Google dyeing resin and you can get a ton of ideas. Add rocks, rust and glitter but have fun! This would be really cool on a sweetheart chainring, I have a skip tooth one I may do this to.
I did all the spaces but didn't like the look so I popped them out before they dried. lesson learned, small batches for the bigger spaces. here is one of the pieces I popped out.
saddle bags?
Re: NDN - Chain Ring Fun!!!!
mean as grips,cool as bike,drop down those lock boxes and do a tail dragger style,I watchin this build
mean as grips,cool as bike,drop down those lock boxes and do a tail dragger style,I watchin this build
Re: NDN - Chain Ring Fun!!!!
bump!
bump!
Re: NDN - Chain Ring Fun!!!!
Wow! Very nice! Can't wait to see more.
Cheers,
Volt
Wow! Very nice! Can't wait to see more.
Cheers,
Volt
Re: NDN - Chain Ring Fun!!!!
This one is turning into an early fave for me. I am using the same chainring for FireWing and was thinking of some sort of flaming insert on the bigger outer holes. Wanna sell your leftovers?
This one is turning into an early fave for me. I am using the same chainring for FireWing and was thinking of some sort of flaming insert on the bigger outer holes. Wanna sell your leftovers?
Re: NDN - Chain Ring Fun!!!!
Nice work....Diggin on the saddlebags...
Nice work....Diggin on the saddlebags...
Re: NDN - Chain Ring Fun!!!!
It would cost me more to ship it. Here is all you need:
SHHHHH! don't tell anyone, but your comment in your build thread "Monark chain ring because it has more of a flame look." got my brain going since I was using the same ring. Started with "how hard would it be to cut red glass and solder it in" to much money and time to do that and it is glass.
2 red pens (free if you can find some around the house or office)
1 pack of resin from Hobby Lobby 11.99 (get their app and they have a weekly 40% of coupon) with discount around 7.50 after tax
a cup to stir in
a wooden stir stick
some rags
wire cutters
a lighter (heat the ink to blow it out of the case)
clear tape ( tape the back of the ring where the resin will sit to keep it flush
here is the video I referenced and I just added the lighter for speed. http://www.youtube.com/watch?v=84QbaefdYOQ
kingfish254 said:This one is turning into an early fave for me. I am using the same chainring for FireWing and was thinking of some sort of flaming insert on the bigger outer holes. Wanna sell your leftovers?
It would cost me more to ship it. Here is all you need:
SHHHHH! don't tell anyone, but your comment in your build thread "Monark chain ring because it has more of a flame look." got my brain going since I was using the same ring. Started with "how hard would it be to cut red glass and solder it in" to much money and time to do that and it is glass.
2 red pens (free if you can find some around the house or office)
1 pack of resin from Hobby Lobby 11.99 (get their app and they have a weekly 40% of coupon) with discount around 7.50 after tax
a cup to stir in
a wooden stir stick
some rags
wire cutters
a lighter (heat the ink to blow it out of the case)
clear tape ( tape the back of the ring where the resin will sit to keep it flush
here is the video I referenced and I just added the lighter for speed. http://www.youtube.com/watch?v=84QbaefdYOQ
Re: NDN - Chain Ring Fun!!!!
Is that a a death star ice cube?!?!
Is that a a death star ice cube?!?!
Re: NDN - Chain Ring Fun!!!!
Thanks buddy, that is a really cool trick.
Thanks buddy, that is a really cool trick.
Re: NDN - Chain Ring Fun!!!!
LOL! death star it is. saves me from having to keep adding ice as I keep pouring more.
kim_dude said:
LOL! death star it is. saves me from having to keep adding ice as I keep pouring more.
Re: NDN - Chain Ring Fun!!!!
lvoe the look of whats i n the glass! cool chain ring thing! thanks for the tip
Troy
lvoe the look of whats i n the glass! cool chain ring thing! thanks for the tip
Troy
Re: NDN - albino waffles!!!
my dad came through for me. he found this bike in an alley by his house with a bunch of other stuff. not sure why this was thrown out but it had some really nice albino waffles on it that I am going to try and use. I just need to get 9/16 to 1/2" reducers.
my dad came through for me. he found this bike in an alley by his house with a bunch of other stuff. not sure why this was thrown out but it had some really nice albino waffles on it that I am going to try and use. I just need to get 9/16 to 1/2" reducers.
