ORBO Racer MX
- Thread starter twojs.bike
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Ooh, that's a tough call. Option A has a pretty cool look, almost BMX in vibe, but option B looks fast! Keep throwing parts at it and see what sticks!
I look at it the same way. Why not both?
Tough call. The BMX bars look great and the others look comfortable 
Plenty of time to figure out the handlebars.
My BMX stem did not work for dimpling the seat stays. The tubes were too narrow. I just brute forced it with vice grips. Used a spanner on the outside to spread the force.
Certainly not elegant, but it worked.
It took all the strength I had to squeeze the vice grips. If I build a custom tool, I will base it on the BMX stem or maybe a C-clamp. My vice grips are 8 inches. A larger pair would probably help.
The dimples caused the spacing between the dropouts to squeeze in about 20mm. I respaced the dropouts.
Still need to straighten the frame and cut the fork.
I will probably also wipe the frame and chain guard with BLO.
Luckily the kickstand is the perfect length for these wheels and tires. I was worried it would be too long.
The 2 speed kickback appears to be working great when I spin the cog by hand. Easily shifts between a direct drive and an under drive. I cannot wait to actually ride this thing.
My BMX stem did not work for dimpling the seat stays. The tubes were too narrow. I just brute forced it with vice grips. Used a spanner on the outside to spread the force.
Certainly not elegant, but it worked.
It took all the strength I had to squeeze the vice grips. If I build a custom tool, I will base it on the BMX stem or maybe a C-clamp. My vice grips are 8 inches. A larger pair would probably help.
The dimples caused the spacing between the dropouts to squeeze in about 20mm. I respaced the dropouts.
Still need to straighten the frame and cut the fork.
I will probably also wipe the frame and chain guard with BLO.
Luckily the kickstand is the perfect length for these wheels and tires. I was worried it would be too long.
The 2 speed kickback appears to be working great when I spin the cog by hand. Easily shifts between a direct drive and an under drive. I cannot wait to actually ride this thing.
