What does the oil do if applied over decals or stickers?
Sent from my iPhone using Tapatalk
RRBBO13 Rad Alert! - Ride video with homemade, custom soundtrack.
- Thread starter SoulGarageOH
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
What does the oil do if applied over decals or stickers?
Sent from my iPhone using Tapatalk
Fv2
Don't know what I'm doing, gonna do it anyway.
It didn't harm the one sticker that was on the frame I used.
But that's also only one person's experience.
Preferably stickers/decals before BLO.
Too late. I’ll just have to wait till July 31 to apply them.
Sent from my iPhone using Tapatalk
It takes a while for the BLO to not be tacky (like weeks) 
It takes a while for the BLO to not be tacky (like weeks)
C’est la vie[emoji52]
Sent from my iPhone using Tapatalk
I picked up my newly, trued wheels from the bike shop and reassembled the bike today. I’m a chain away from a test ride; I will probably throw an old one on it tomorrow. In other news, fortunately in my inexperience with linseed oil, I must have applied it very, very thin, because it’s not tacky at all except for a few spots where I must have put it on more generously.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Took it out for a test ride. 12 miles on a dusty trail revealed the following:
The Pros-
Smooth, fast ride. Lighter than I thought it would be. Great control/handling. Brooks saddle ( 1st time rider on one ) is a lot more comfortable than it looks.
The Bugs-
Might try a layback seat post for more room and comfort. Inconsistent Clicking in the bottom bracket area began about halfway through the ride. Bearings are brand new so I don’t think it’s them. Then, I’m not sure if it’s normal function for these old Huffy coasters or a malfunction, but after pedaling, then coasting, and then when beginning to pedal again, I have to pedal the cranks a few times before the gear catches to continue forward.
Sent from my iPhone using Tapatalk
The Pros-
Smooth, fast ride. Lighter than I thought it would be. Great control/handling. Brooks saddle ( 1st time rider on one ) is a lot more comfortable than it looks.
The Bugs-
Might try a layback seat post for more room and comfort. Inconsistent Clicking in the bottom bracket area began about halfway through the ride. Bearings are brand new so I don’t think it’s them. Then, I’m not sure if it’s normal function for these old Huffy coasters or a malfunction, but after pedaling, then coasting, and then when beginning to pedal again, I have to pedal the cranks a few times before the gear catches to continue forward.
Sent from my iPhone using Tapatalk
Even with new BB bearings, it's possible some crud from inside the frame made it's way to the BB.
Looking good!
Looking good!
Could be a stiff chain link, they can crackle and snap when they don't hit exactly right on the chain ring. And if it's intermittent, that could be it. Massage all the links, loosen up any that might be stuck. Lube chain.
On another note, if you like that Brooks now, you will love it later! Great saddles. And I just put those tires on the Fisher for an extended bike path ride we have coming up. They have a very resilient ride and are very light weight.
Bike looks solid!
Thanks OJ. I’ll give my chain a good message and see what happens. I love these tires so far. Fast rolling, great grip.
Sent from my iPhone using Tapatalk
May have to change out the hub. Late in the game for this move, but I can’t figure this old Huffy hub out. I took it apart and reassembled it, but I can’t figure out why it’s not “catching” upon the re-pedal until 2-3 rotations of he crank. I have a couple Bendix hubs to switch out, but it’s killing me to do it because I just built that wheel and had it trued. Ugh!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Super double-sticky stuff
Sent from my iPhone using Tapatalk
Finkaliscious!!!!
I fixed my (bike) issues! I believe the clicking in the bottom bracket was because there was a little play in one of the bearing cups because where the chain stays come into the bottom I’m bracket it didn’t allow the cup to insert all the way. So I used a grinder attachment on my drill and filed it back just enough. Clicking gone. The hub was just too loosey-goosey. I tighten it up a little and it solved my problems with that. Maybe a front brake, some cosmetics, and a ride vid with custom soundtrack this week and it will be a wrap!
Sent from my iPhone using Tapatalk
Bike is 95% completed. Custom soundtrack for ride video is 100% completed, and ride video is 15% completed. Time is-a-ticking.
Here is my ride video with homemade, custom soundtrack. Sadly, the tricks listed in the lyrics and videos of my song are not performed... I can't do 'em anymore... too old and too out of shape.
Nice!
And best ride video I've seen so far!
Gesendet von meinem K00E mit Tapatalk
