BO15 RaTs GaSs...Great year all!...pg 26

Rat Rod Bikes Bicycle Forum

Help Support Rat Rod Bikes Bicycle Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Look'n good OJ!

I have to admit that the first mock up that you posted showing the fork/fender/wheel set up on the bike really looked off to me. But when I remembered that it is a gasser it made sense. I'm thinking that without the gasser reference most people won't get it.

I'm guessing that you have another ace up your sleeve though! :wink1:
 
Last edited:
I know what's missing on the gasser moon tank. It needs a filler cap. Since it's a beer can, maybe use a beer bottle cap. If it needs more size, then you can use gear from a cassette.

1589983801290.png
 
I know what's missing on the gasser moon tank. It needs a filler cap. Since it's a beer can, maybe use a beer bottle cap. If it needs more size, then you can use gear from a cassette.

View attachment 121563


Yes! I am planning on a filler cap for sure. Haven't quite got it down to what yet. But a beer bottle cap might do it. :thumbsup:
 
Look'n good OJ!

I have to admit that the first mock up that you posted showing the fork/fender/wheel set up on the bike really looked off to me. But when I remembered that it is a gasser it made sense. I'm thinking that without the gasser reference most people won't get it.

I'm guessing that you have another ace up your sleeve though! :wink1:

You know me too well, TRM! :wink1:
 
Been keeping busy out there, back 40 looks a little crowded.
 
Love the ideologues, OJ. You have a calming voice that works well with "how to" videos. I'm looking forward to seeing how that acrylic vinyl paint works on your seat. I saw it somewhere and was wondering if it would work well on a bike seat.
 
Love the ideologues, OJ. You have a calming voice that works well with "how to" videos. I'm looking forward to seeing how that acrylic vinyl paint works on your seat. I saw it somewhere and was wondering if it would work well on a bike seat.

I use the 100% acrylic. It works well. And for the 'vintage' look, it does gradually wear off and gives it a nice aged look.

When I was a kid, I would lay in bed at night in our attic bedroom out on the farm, and listen to the stereo counsel with those big built in 2-way speakers and practise being a late night DJ.
 
RaTs GaSs build Day #21

Gettin' down in the details...
I did a preview of my idea for the rear tail light in my most recent Videologue #5 further up this page 9. Today I was able to finish it off. I ended up not going with the first 'modern' reflector as the lens. Instead, I found a bangle on an old mud flap from my neighbors bicycle that I turned into "Four-gone Conclusion" in an MBBO build off couple years back. This red lens is a doozy!

20200521_181900.jpg


As I was looking at it, and enjoying a happy hour 'beverage' in the BACK40, something spoke right out loud, it was the ale talking.
"You need a shroud around that lens. Look at the bottom of my can. See ?

Sure enough, if I trim out the inside ring, and then cut the bottom rim off the can, it will fit right around that lens.

20200521_190429.jpg
20200521_191300.jpg


Another project today was inspired by my brother and inspirational director, Kingfish. He suggested a fuel cap for the MOON eyes Hamm's beer keg can / faux gas can. His suggestion was to use a bottle cap, as it is shaped like a cap with ridges to grip when twisting off. Of course I didn't have any laying around, so I had to empty a bottle. I like it @kingfish254 !

20200521_173642.jpg


The third thing I accomplished today was to paint the white saddle. @GuitarlCarl once said,
" Real men don't ride white saddles" (or something like that) during our Fall Muscle Bike BO. That's when I used some black Flex Seal spray paint to paint my saddle on RaTsberry Buffet.

20200521_161218.jpg


I finished off the black with a couple coats of clear, and it is shiny as the day I did it back in late October / early Nov. So I figured, let's go! I did it again with RaTs GaSs rear end support system.


100087513_997653820632436_6991561327382626304_n.jpg
20200521_190535.jpg
20200521_190524.jpg


I forgot to mention, I ditched the 'push light' style idea for the rear tail light. As I was eye balling the size of the trumpet mute, I remembered I had a second remote control LED light just like the one I used in the head light. It took some doing, as I had to splice and dice the two pieces of the mute, but in the end it turned out as good as I could have expected.

Now I have one control, that works for head and tail light.
20200521_191446.jpg


Off.....
20200521_191534.jpg


On...
20200521_191524.jpg

20200521_195318.jpg
20200521_195450.jpg
20200521_191227.jpg
 

Latest posts

Back
Top