I finally got some pics of my mixte. I build this bike shortly after finding this site. I was looking through old post and found some of the earlier pics of Jetro's mixte Massacre and loved it. I couldn't find a mixte frame but I had a few old 27 inch 3 speed boys bikes laying around. I picked one out and removed the top tube, bent the seat stays down and extended them, and shortened the seat tube. I then painted it flat black, slapped on some 24 inch wheels and tires, and all the neccesary parts needed.
I ran across pics of Massacre with the spikes added to the fenders and didn't realize it was the same bike but liked the idea so I borrowed the idea and also added a skull to the front fenderand some white pin stripes. The fendes were from the 27 inch 3 speed. I used a wooden ball to widen them a bit and as they widened the diameter got smaller. Here is a link the post on doing this in the how to section.
viewtopic.php?f=3&t=5391&p=64052&hilit=ball#p64052
My brother gave me this cabinet knob to put on the back fender.
Thanks for the inspiration Jetro.
I ran across pics of Massacre with the spikes added to the fenders and didn't realize it was the same bike but liked the idea so I borrowed the idea and also added a skull to the front fenderand some white pin stripes. The fendes were from the 27 inch 3 speed. I used a wooden ball to widen them a bit and as they widened the diameter got smaller. Here is a link the post on doing this in the how to section.
viewtopic.php?f=3&t=5391&p=64052&hilit=ball#p64052
My brother gave me this cabinet knob to put on the back fender.
Thanks for the inspiration Jetro.