My cousin gave me this 20" West Coast Chopper his neighbor tossed.
I've been sanding and brushing off the rusted, flaking chrome.
I've been sanding and brushing off the rusted, flaking chrome.
Rusted Hulk of a Chopper
- Thread starter Kevin B
- Start date
Help Support Rat Rod Bikes Bicycle Forum:
Put etching primer on the frame and fork legs today.
Freshened up the wheels so I can rebuild them and test the wheel set. I don't want to get deep into this project only to discover the wheel set is no good.
Tire had a flat spot from years of no air. The clamp on the sidewall pushes it back out round. I'm hoping the Florida sun will reset the tire closer to true.
Freshened up the wheels so I can rebuild them and test the wheel set. I don't want to get deep into this project only to discover the wheel set is no good.
Tire had a flat spot from years of no air. The clamp on the sidewall pushes it back out round. I'm hoping the Florida sun will reset the tire closer to true.
The sunshine and clamping returned the tires to round. I don't feel bad about investing time and resources in the rest of the bike now. The tires have cracks but I've seen worse.
Last edited:
I had to use a sander to remove some of the heavy rust from the crank and chain ring chrome. After masking a new Iron Cross I sprayed them, etching primer, primer, color coat and finally clear.
Very cool bike and progress! Wow.
